Pontiac G3 Wave Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(25)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(25)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Pontiac G3 Wave Intake Manifold Gaskets Replacement is $788 with $158 for parts and $630 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Pontiac G3 WaveL4-1.6LService typeIntake Manifold Gaskets ReplacementEstimate$1014.06Shop/Dealer Price$1109.40 - $1358.97
Show example Pontiac G3 Wave Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(25)

Rating Summary
24
0
1
0
0
24
0
1
0
0

Kyle

21 years of experience
20 reviews
Kyle
21 years of experience
Pontiac Grand Prix V6-3.8L Turbo - Intake Manifold Gaskets - Evanston, Illinois
I had a great experience with the mechanic and yourmechanic.com. Reasonable prices, they saved me over half of the price quoted from a mechanic shop. From 850 to 382 and the service was great!!!! Recommending to family and friends.

Manuel

33 years of experience
590 reviews
Manuel
33 years of experience
Pontiac Grand Prix V6-3.1L - Intake Manifold Gaskets - Fullerton, California
I was very happy with the service.

Mazyar

20 years of experience
587 reviews
Mazyar
20 years of experience
Pontiac Firebird V6-3.8L - Intake Manifold Gaskets - Tucker, Georgia
First off, I can’t thank Mazyar (Mark) enough for his excellent customer service by going above and beyond to fix my vehicle. I had to reschedule a few times because of the weather. I really needed my car fixed, but I do not have a covered parking spot. He understood my frustration and went above and beyond to find a shelter, so that he could be able to fix my car for me so I wouldn’t have to reschedule again. Needless to say my Old School Firebird is back up and running like the muscle car she is thanks to him. Words can’t express the gratitude and appreciation I’m feeling due to his excellent assistance in this matter. It was good to know that I could count on him to not just fix my car properly, but to also give me the confidence and security of trust in knowing that he was willing to not just care about my car, but care about me too.

Terry

14 years of experience
45 reviews
Terry
14 years of experience
Pontiac Grand Prix V6-3.8L - Intake Manifold Gaskets - Louisville, Kentucky
Greatest kind of person to hire for car servicing. Smart but humble. Punctual. He seems to take pride in being under the hood which is a great quality. Not only do i prefer him but id personally recommend Mr. Reed to anyone.

Excellent Rating

(25)

Rating Summary
24
0
1
0
0
24
0
1
0
0
Number of Pontiac Intake Manifold Gaskets Replacement services completed
275+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How to Check a Car Fuel Pump
Car fuel pumps transfer gas from the fuel tank to the car engine and can be mechanical or electric. Cars low on gas can cause fuel pumps to overheat.
Symptoms of a Bad or Failing Brake Hose
If your car's brake pedal feels mushy, the brake hose looks damaged, or if your brakes stop working, you may need to replace the brake hose.
P000B OBD-II Trouble Code: “B” Camshaft Position Slow Response
P000B means that the ECM has detected a fault with the position and timing of the camshaft due to a loose fuel cap, or low oil pressure.

rattling noise when turning on a.c. then later stops making noise

Hello there, many faults will cause a rattling noise when the AC is turned on in your 1997 Lexus ES300. The most common would be the belt tensioner, idler pulley, AC clutch, AC compressor, or the belt itself. When the...

My car downshifts in low gear and the neutral light blinks while driving - 2002 Mitsubishi Eclipse

Hello. A flashing neutral light is an indicator that the computer has detected a fault with the transmission's electronic control system. The first thing I would do is check the vehicle's transmission fluid to make sure that it is at...

Is a power steering leak evident if it's on a wet ground

It is very likely that what you were seeing is a power steering fluid leak. Many universal power steering fluids are often clear in color. This could be why when it was mixed with rain water that it turned white....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com