Pontiac Aztek Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Pontiac Aztek Power Steering Pressure Hose Replacement is $455 with $175 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Pontiac AztekV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$660.40Shop/Dealer Price$755.20 - $1023.40
2005 Pontiac AztekV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$642.38Shop/Dealer Price$733.65 - $999.20
2002 Pontiac AztekV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$642.38Shop/Dealer Price$733.70 - $999.29
2003 Pontiac AztekV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$642.38Shop/Dealer Price$733.70 - $999.28
2001 Pontiac AztekV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$642.38Shop/Dealer Price$736.64 - $1004.44
Show example Pontiac Aztek Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(34)

Rating Summary
29
2
2
1
0
29
2
2
1
0

Cesar

10 years of experience
292 reviews
Cesar
10 years of experience
Pontiac Aztek V6-3.4L - Radiator - Renton, Washington
He did good job on radiator replacement in a timely manner!

Krystal

18 years of experience
106 reviews
Krystal
18 years of experience
Pontiac Aztek V6-3.4L - Brake fluid is leaking - Darien, Illinois
Always early and fast.

Chuck

18 years of experience
464 reviews
Chuck
18 years of experience
Pontiac Aztek V6-3.4L - Wheel Stud Replacement (Driver Side Front) - Plano, Texas
He was very friendly, Did a great job on my truck, he definitely let me know what needed to be done and when everything is due. Will definitely be booking again!!!

Braxton

12 years of experience
205 reviews
Braxton
12 years of experience
Pontiac Aztek V6-3.4L - Radiator - Longwood, Florida
Braxton was on time, efficient, thorough, courteous, and easy to talk to. I’ll be looking to book him specifically the next time I need service. Highly recommend!

Excellent Rating

(34)

Rating Summary
29
2
2
1
0
29
2
2
1
0
Number of Pontiac Aztek services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How To Install a Locking Gas Cap
Gas caps are necessary for proper gas tank function. Overtime, a gas cap can fail if the thread gets damaged or if there is a leak in the seal.
P0706 OBD-II Trouble Code: Transmission Range Sensor Circuit Range/Performance
P0706 Code Definition The P0706 code is a generic powertrain code related to the transmission. This code is non-emission related. The transmission...
How to Replace a Vacuum Brake Booster
The vacuum brake booster generates extra force for car brakes. If your car is hard to stop or wants to shut off, replace your brake booster.

My Chevr HHR (2006) has milky oil, and white smoke puffs out of the dipstick tube. The car doesn't overheat,and the heater works.

Check for any change in coolant level in the overflow reservoir. If no change over, say, 500 miles, you simply have a high level of condensation because there is absolutely no other source of water to the engine. You can...

windshield wiper missing spots

If the missing spots are within the area that is actually swept by the moving wiper blades, that means the spring tension on the arm is inadequate. Sometimes the spring that provides the tension will get rusty and sometimes the...

manual key ( no remote ) only opens and closes driver side door. other doors wont open/close.

Hi Varun. Thanks for submitting your question this morning. Usually, when you use a manual key to unlock a door, it will only unlock that individual door. I'm not 100% sure that unlocking all doors is a feature of this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com