Plymouth Horizon Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(167)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(167)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Plymouth Horizon Power Steering Pressure Hose Replacement is $196 with $56 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Plymouth HorizonL4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$284.70Shop/Dealer Price$320.73 - $420.70
Show example Plymouth Horizon Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Plymouth mechanics

Real customer reviews from Plymouth owners like you.

Excellent Rating

(167)

Rating Summary
154
5
1
1
6
154
5
1
1
6

Matthew

20 years of experience
3 reviews
Matthew
20 years of experience
Plymouth Grand Voyager V6-3.3L - Spark Plugs - Killeen, Texas
Mr. Birkinbine arrived early, very professional and did everything to ensure my vehicle was put together and complete. I appreciate his work and dedication to customer service. I definitely would do business again. Thank you so much.

David

38 years of experience
39 reviews
David
38 years of experience
Plymouth Acclaim V6-3.0L - Car AC Repair - Austin, Texas
very pleasant,i am very satisfied with the job he done and information that he gave me , he is a professional a/c man!!!!!!!!!!!!!1

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Plymouth Voyager V6-3.0L - Speedometer Sensor - Apache Junction, Arizona
Thank you! Your service was great.

Harish

28 years of experience
588 reviews
Harish
28 years of experience
Plymouth Neon L4-2.0L - Alternator - Charlotte, North Carolina
Harish was on time, he replaced my alternator without any issues. I will be recommending his services.

Excellent Rating

(167)

Rating Summary
154
5
1
1
6
154
5
1
1
6
Number of Plymouth services completed
1837+
services done by our mechanics
TOTAL NUMBER OF EXPERT Plymouth MECHANICS
100+
experts on our platform

Recent articles & questions

How to Keep the Interior of a Convertible Looking Great
Convertible interiors need protection from the weather. Keep the top up and use a sunshade for maximum car interior protection.
A Buyer’s Guide to the 2013 Subaru BRZ
This This sports car for the everyday man or woman is an irresistible combination of style, handling, and just plain fun. The BRZ offers a respectably good time on the way to work or on the way around the race...
P0162 OBD-II Trouble Code: Sensor Circuit Malfunction (Bank 2, Sensor 3)
P0162 P0162 code definition Trouble code P0162 is set when a malfunction is detected on the bank 2 sensor 3 oxygen sensor circuit. What the P0162 code means Bank 2 refers to the side of the engine opposite of cylinder...

How do the door position lights work?

Your car is equipped with a number of interior lights that turn on either when you open a door or put the key into the ignition. The door position lights are set to come on when the door opens by...

Power steering not working.

It sounds like your serpentine belt is broken. (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement) You can inspect the belt under the hood in front one the motor. If the belt is OK you may have a bad power steering pump. (https://www.yourmechanic.com/services/power-steering-pump-replacement) I recommend having a...

replaced engine with a new crate motor and it wont start. can you list the things for me to check

First thing is to remove and inspect the cap and rotor for the spark grounding through the rotor button. Using a test light, hook the lead to a ground, and test with the key on if the coil has power...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com