Plymouth Breeze Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Plymouth Breeze Car Thermostat Replacement is $162 with $67 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Plymouth BreezeL4-2.4LService typeCar Thermostat ReplacementEstimate$257.43Shop/Dealer Price$303.04 - $417.37
1996 Plymouth BreezeL4-2.0LService typeCar Thermostat ReplacementEstimate$251.55Shop/Dealer Price$300.71 - $425.64
1997 Plymouth BreezeL4-2.0LService typeCar Thermostat ReplacementEstimate$251.55Shop/Dealer Price$300.71 - $425.64
1996 Plymouth BreezeL4-2.4LService typeCar Thermostat ReplacementEstimate$232.83Shop/Dealer Price$277.29 - $388.16
2000 Plymouth BreezeL4-2.0LService typeCar Thermostat ReplacementEstimate$251.55Shop/Dealer Price$300.72 - $425.67
2000 Plymouth BreezeL4-2.4LService typeCar Thermostat ReplacementEstimate$228.71Shop/Dealer Price$272.16 - $379.96
1999 Plymouth BreezeL4-2.0LService typeCar Thermostat ReplacementEstimate$247.83Shop/Dealer Price$294.67 - $412.96
1997 Plymouth BreezeL4-2.4LService typeCar Thermostat ReplacementEstimate$242.43Shop/Dealer Price$288.29 - $402.82
Show example Plymouth Breeze Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Plymouth mechanics

Real customer reviews from Plymouth owners like you.

Excellent Rating

(6)

Rating Summary
5
0
0
0
1
5
0
0
0
1

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Plymouth Breeze L4-2.4L - Timing Belt - Oakland, California
Very experienced and thorough

Ricardo

23 years of experience
199 reviews
Ricardo
23 years of experience
Plymouth Breeze L4-2.4L - Brake Pads Replacement (Front) - Homestead, Florida
Very professional. Made my day after weeks of anxiety.

Melvin

14 years of experience
158 reviews
Melvin
14 years of experience
Plymouth Breeze L4-2.4L - Alternator - Virginia Beach, Virginia
Great first impression, very friendly, professional and knowledgeable, did a very good job, he will be my mechanic from now on.

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Plymouth Breeze L4-2.0L - Car starts and then dies - Clayton, California
Outstanding mechanic

Excellent Rating

(6)

Rating Summary
5
0
0
0
1
5
0
0
0
1
Number of Plymouth Breeze services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Plymouth MECHANICS
100+
experts on our platform

Recent articles & questions

Michigan Parking Laws: Understanding the Basics
Drivers Drivers in the state of Michigan need to know the laws related to parking. Namely, they need to know where they are not allowed to park. This will help to prevent them from getting parking tickets or getting their...
How to Transfer a Car Title in Michigan
In In order to be recognized as the owner of a vehicle in Michigan, you must have a title in your name. Whenever ownership of a vehicle changes, the title must be transferred, which requires steps of both the previous...
Arkansas Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Arkansas. Speed limits in Arkansas 70 mph: rural freeways and interstate highways, as posted 65 mph: trucks on...

Car won't start, says key error. This is the first time it ever happened

Hello. The key error message you are experiencing can be caused by a few different things. The most common causes are an issue with the immobilizer system, or with the steering column. The immobilizer system is the vehicle's security system....

2010 Ford Taurus w/190K miles stalling when idle. Told it needs new timing chain and cam phaser. Is this true?

The diagnosis seems to be what may be causing the many different codes since a timing chain and phasers can cause the stalling. The cost quotes is not out of line.

Car starts then vibrates then oil, check engine and battery light comes on. Any ideas of what could be going on?

If oil, charge and check engine lights come on after it stalls as they come on when key is on but engine is off. You should have the check engine light checked for misfire codes since you may have a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com