Nissan 200SX Car Horn Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(25)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(25)

Car Horn Replacement Service

How much does a Car Horn Replacement cost?

On average, the cost for a Nissan 200SX Car Horn Replacement is $123 with $28 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Nissan 200SXL4-2.0LService typeCar Horn ReplacementEstimate$170.15Shop/Dealer Price$193.94 - $242.81
1996 Nissan 200SXL4-1.6LService typeCar Horn ReplacementEstimate$150.15Shop/Dealer Price$173.96 - $222.84
1984 Nissan 200SXL4-1.8L TurboService typeCar Horn ReplacementEstimate$150.15Shop/Dealer Price$173.96 - $222.84
1995 Nissan 200SXL4-1.6LService typeCar Horn ReplacementEstimate$150.15Shop/Dealer Price$173.94 - $222.80
1995 Nissan 200SXL4-2.0LService typeCar Horn ReplacementEstimate$150.15Shop/Dealer Price$173.97 - $222.87
1986 Nissan 200SXL4-1.8L TurboService typeCar Horn ReplacementEstimate$150.15Shop/Dealer Price$173.96 - $222.84
1988 Nissan 200SXV6-3.0LService typeCar Horn ReplacementEstimate$155.15Shop/Dealer Price$178.82 - $227.60
1984 Nissan 200SXL4-2.0LService typeCar Horn ReplacementEstimate$155.15Shop/Dealer Price$179.19 - $228.26
Show example Nissan 200SX Car Horn Replacement prices

What is the Horn all about?

The horn is normally located at the center of the steering wheel. It is used to make a vehicle’s presence known to pedestrians and other cars on the road.

Keep in mind:

  • A problem with the horn might just be a problem with the battery. Having the battery contacts cleaned may solve the issue.
  • A muffled horn can be just as bad as a broken horn.
  • Checking on the condition of the fuse box for the horn is important, to make sure dust and moisture are not present.

How it's done:

  • The vehicle hood is raised and secured in the open position
  • The battery is disconnected
  • The defective high or low horn is removed
  • A new horn is installed
  • The battery is reconnected and the horn tested for proper operation

Our recommendation:

A number of components can cause the horn to malfunction. The battery, the steering wheel, the horn itself, or the wires connecting it together could be to blame. Have one of our expert mechanics check it out and determine if any wires or connections should be replaced after a horn inspection is done.

What common symptoms indicate you may need to replace the Horn?

  • Muffled sound when horn is pressed
  • No sound when horn is pressed

How important is this service?

The horn is an important safety feature and a horn malfunction can have severe consequences if it leaves you unable to get the attention of other cars or pedestrians.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(25)

Rating Summary
24
1
0
0
0
24
1
0
0
0

Jose

17 years of experience
433 reviews
Jose
17 years of experience
Nissan 200SX L4-2.0L - Car is not starting - Portland, Oregon
Jose arrived as scheduled to install a new distributor. I really like the way notifications are sent: mechanic is on the way, has arrived, etc. He is very cordial, friendly, easy going, and knowledgeable. After providing some more detailed info before starting the repair, Jose thought it might not be the distributor as previously diagnosed online. He didn't feel it would be proper to go through the needless replacement of a part if that wasn't the source of the problem. He determined and rightly concluded that the starter was the issue. A quick bang on it with some tools and the car started fine. Also took a picture to show me that even though the starter had been replaced once by Nissan, it was a remanufactured part instead of new. Jose turned the repair into an inspection thereby saving me money as well as an unnecessary repair. I have since placed an order for a starter, and one it arrives will be scheduling for Jose to come out again for installation.

Theodore

16 years of experience
1601 reviews
Theodore
16 years of experience
Nissan 200SX L4-1.6L - Car is not starting - Redmond, Washington
Showed up on time, and did an extremely thorough check of my car. He is coming back to do repairs soon, too! Awesome services, highly recommended.

Tam

22 years of experience
251 reviews
Tam
22 years of experience
Nissan 200SX L4-2.0L - Car is shaking or vibrating - Union City, California
Tam is fantastic! He quickly assessed the problem, listened to confirm his suspicions in a test drive. Effectively communicated what needed to be fixed and updated the database before leaving premises. Great work overall!

Theodore

16 years of experience
1601 reviews
Theodore
16 years of experience
Nissan 200SX L4-1.6L - Serpentine/Drive Belt Replacement - Issaquah, Washington
Super professional. Straight to the point, completed the job in less than a hour. No complaints. Good mechanic.

Excellent Rating

(25)

Rating Summary
24
1
0
0
0
24
1
0
0
0
Number of Nissan 200SX services completed
275+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Nissan Titan
With With the 2012 Titan, Nissan continues its march into domestic territory. This model lives up to its name, but it’s also quite impressive inside as well. Even if you are in the market and wouldn’t normally consider a truck,...
How to Prepare for the Idaho Driver’s Written Test
If If you are preparing to get your license in Idaho, you know that you first need to pass your written exam so you can then take your road test. The written exam, while it isn’t difficult, does cause some...
How to Replace a Steering Angle Sensor
A steering angle sensor fails if the Traction Control Light illuminates, the steering wheel feels loose, or the vehicle drives differently.

My wife's car makes a clicking noise when the wheel is turned; could it be the CVs?

Hello - Yes, your diagnostic skills are very good! It is almost certainly the CV joints, the outer joints in particular. I would recommend that you have the axle/CV joint assembly replaced (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement) in both front axles by a mobile,...

Idler pulley broke off metal it was attached to after results from a crooked pulley and multiple serpentine belt slips.

You're right in that the stress will be too great and it will come apart again. This is not something you can fix with glue. You will need to take off all of the broken parts and replace them with...

My 5 speed dodge ram truck won't go in reverse all other other gears work fine. What might be the issue?

This may suggest the transmission synchros may be wearing out. Your transmission has small gear synchronizer rings that help to move the transmission in and out of the various gears. When these begin to wear out, you may notice it...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com