Mitsubishi Van Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(153)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(153)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Mitsubishi Van Brake Pad Replacement is $263 with $67 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Mitsubishi VanL4-2.4LService typeBrake Pads - Rear ReplacementEstimate$483.22Shop/Dealer Price$526.70 - $639.30
1990 Mitsubishi VanL4-2.4LService typeBrake Pads - Front ReplacementEstimate$413.19Shop/Dealer Price$467.95 - $626.48
Show example Mitsubishi Van Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(153)

Rating Summary
140
12
1
0
0
140
12
1
0
0

Derrick

12 years of experience
184 reviews
Derrick
12 years of experience
Mitsubishi Van L4-2.4L - Adjust Ignition Timing - Emeryville, California
What a cool service! Derrick kept in touch as he was on his way, was friendly and informative, and fixed the timing problem on my old, unusual car. The fee was reasonable, especially considering the mechanics come to your house.

dre

17 years of experience
18 reviews
dre
17 years of experience
Mitsubishi Galant V6-3.8L - Brake Pads Replacement (Front) - Washington, District of Columbia
This was my first time using YourMechanic.com and it will not be my last. The use of the site is easy to navigate, I was provided with a name and picture of my mechanic, and was able to select from various times and dates for service. Oh, let's not forget that they come to you and they will also provide the parts needed...no more dropping your car off at the shop for hours or days at a time. I was able to wash dishes, clothes, and cook while my brakes were being replaced. AWESOME!

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Mitsubishi Galant L4-2.4L - Brake Pads Replacement (Rear) - Montclair, New Jersey
Came on time, and did the job right at a decent price.

Jose

18 years of experience
433 reviews
Jose
18 years of experience
Mitsubishi Outlander V6-3.0L - Brake Pads Replacement (Front) - Beaverton, Oregon
Jose was on time and quick to replace the front brake pads on my Mitsubishi. I would highly recommend him and this service for anyone wanting to avoid a costly and time consuming event at a typical shop. Jose is my future "go to guy" for any repairs. Thanks Jose!

Excellent Rating

(153)

Rating Summary
140
12
1
0
0
140
12
1
0
0
Number of Mitsubishi Brake Pad Replacement services completed
1683+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
800+
experts on our platform

Recent articles & questions

How to Replace an Exhaust Gas Recirculation (EGR) Control Solenoid
Exhaust gas recirculation (EGR) systems are controlled by the EGR control solenoid, which is controlled by the powertrain control module (PCM).
How to Inspect Car Vacuum Hoses
As As you drive your car, your engine draws in massive amounts of air which it then mixes with gas and ignites it to keep the engine running. The vacuum created as a result is fairly constant depending on throttle...
10 Best Stores to Buy Auto Parts in Saint Louis, Missouri
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Saint Louis is Advance Auto Parts.

Driver's power seat not moving forward or backward

The driver's seat will need to be repaired with the power seat motor repair kit. The kit requires the driver's seat track to be removed, and involves over three hours of work. The power window motor switches could be sticking....

VDC OFF light comes on and SLIP light's comes on that is when you drive the car for 15 min or so and hesitate then go back to norm

Hi There, It sounds like you may have a faulty cam position sensor that may be causing the jerking reaction (which is normal when the cam sensor begins to fail), resulting in the traction control system to engage. The camshaft...

When backing up the steering wheel seems to lock and there is like a squeaking noise,but when the car is warmed up it seems fine

This suggests your power steering pump may be failing or you have a leak elsewhere in one of the power steering lines. The power steering (https://www.yourmechanic.com/services/power-steering-fluid-is-leaking-inspection) system operates on very high pressurized hydraulic pressure (in some cases as much as...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com