Mitsubishi Raider Window Motor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Window Motor Replacement Service

How much does a Window Motor Replacement cost?

On average, the cost for a Mitsubishi Raider Window Motor Replacement is $242 with $147 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Mitsubishi RaiderV6-3.7LService typeWindow Motor - Passenger Side Front ReplacementEstimate$409.35Shop/Dealer Price$492.94 - $721.21
2008 Mitsubishi RaiderV6-3.7LService typeWindow Motor - Driver Side Rear ReplacementEstimate$392.55Shop/Dealer Price$476.96 - $707.64
2006 Mitsubishi RaiderV6-3.7LService typeWindow Motor - Passenger Side Front ReplacementEstimate$389.35Shop/Dealer Price$472.96 - $701.24
2006 Mitsubishi RaiderV6-3.7LService typeWindow Motor - Passenger Side Rear ReplacementEstimate$392.55Shop/Dealer Price$476.94 - $707.60
2007 Mitsubishi RaiderV6-3.7LService typeWindow Motor - Passenger Side Rear ReplacementEstimate$392.55Shop/Dealer Price$476.97 - $707.67
2007 Mitsubishi RaiderV6-3.7LService typeWindow Motor - Driver Side Rear ReplacementEstimate$392.55Shop/Dealer Price$476.96 - $707.64
2007 Mitsubishi RaiderV8-4.7LService typeWindow Motor - Passenger Side Rear ReplacementEstimate$397.55Shop/Dealer Price$481.82 - $712.40
2007 Mitsubishi RaiderV8-4.7LService typeWindow Motor - Passenger Side Front ReplacementEstimate$394.35Shop/Dealer Price$478.19 - $706.66
Show example Mitsubishi Raider Window Motor Replacement prices

What is the Window Motor all about?

The window motor is located inside the door panel behind the trim, and is responsible for raising and lowering the window when the switch is pressed. It is a reversible electric motor, powered up by an electric switch on the inside of the door. When the button to open or close the window is pressed, a circuit completes and the electric window motor cycles. The window glass is attached to a track and is on a window regulator that allow it to move squarely and smoothly up and down. If the window motor is faulty, you may experience a slow-moving window especially upward, the window may not move at all when the button is pressed, or the window may begin to sink back into the door after the power window switch is released.

Keep in mind:

  • The window motor is a sealed unit, and is not designed to need maintenance or service.
  • A window motor is located inside each door equipped with a power window. Accessing and repairing a power window motor is best left to one of our expert technicians.

How it's done:

  • Identify which window motor has failed.
  • Remove door panel to gain access.
  • Remove and replace faulty window motor and regulator.
  • Check operation of the window regulator and motor.
  • Reinstall door panel.

Our recommendation:

Because the window motor is a sealed system, it does not receive any scheduled maintenance. When it fails, replacement is the only option. However, there are other potential causes of malfunctions, including the window switch and wiring problems. If you’ve noticed that your window motor is not working properly, or it is working inconsistently, have the problem diagnosed by one of our expert mechanics.

What common symptoms indicate you may need to replace the Window Motor?

  • Window does not roll up or down
  • Window rolls down but not up
  • Window does not hold its position
  • Window slows or stalls out when rolling up the window

How important is this service?

The power window motor closes your door windows to provide security for belongings inside, and provides protection from environmental elements. A window must be able to open in the event of an emergency, so have a faulty window motor replaced immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0

James

12 years of experience
233 reviews
James
12 years of experience
Mitsubishi Raider V6-3.7L - Oil Change - San Rafael, California

Toby

10 years of experience
100 reviews
Toby
10 years of experience
Mitsubishi Raider V8-4.7L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Fort Worth, Texas
Toby was on-time a little early even. Was very personable, got right to work inspecting my truck and installing new O2 sensors. I had replaced spark plugs previously and had not reinstalled the baffle for the mass air sensor and Toby took the time to install while finishing up his work.

Matthew

33 years of experience
1273 reviews
Matthew
33 years of experience
Mitsubishi Raider V6-3.7L - Fuel Injector - Newport News, Virginia
Great Mechanic!!! Work was complete in a very timely manner. Much easier than having go through the gymnastics of having a dealership perform the work.

Emanuel

18 years of experience
81 reviews
Emanuel
18 years of experience
Mitsubishi Raider V6-3.7L - Oil Change - Sugar Land, Texas

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0
Number of Mitsubishi Raider services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

When Should I Use Fog Lights?
Most Most cars used to come with only high and low beam headlights. That was about it. Fog lights were introduced in an effort to make highway travel during foggy conditions safer. Many newer vehicles come with fog lights as...
P0139 OBD-II Trouble Code: O2 Sensor Circuit Slow Response (Bank 1, Sensor 2)
P0139 code definition O2 Sensor Circuit Slow Response (Bank 1, Sensor 2) What the P0139 code means P0139 is the OBD-II generic...
P3443 OBD-11 Trouble Code: Cylinder 6 Deactivation/Intake Valve Control Circuit Low
What What the P3443 code means This code indicates that there is a problem with your intake valve on cylinder number 6. Your vehicle’s control module recognizes that the measured values from the throttle position (TP) sensor, the manifold absolute...

transmission fluid bubbles over the dipstick any help?

This is caused if air is introduced to the fluid. For example, air can get into the filter inside the transmission pan or may be introduced if the fluid is too low or too full. If you just had it...

If I change one valve cover and gasket do I need to do the other?

You do not have to change both valve cover gaskets at the same time. If you have an engine oil leak (https://www.yourmechanic.com/services/oil-fluid-leak-inspection) that is coming from both valve covers then it would be recommended that you have both valve cover...

Foot pedal vibration at certain RPM's?

The vibration still sounds like it could be coming from a worn engine or transmission mount. You may be able to do a simple check by engaging the parking brake and putting the vehicle in drive and blipping the throttle...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com