Mitsubishi Endeavor Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Mitsubishi Endeavor Serpentine/Drive Belt Replacement is $206 with $66 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Mitsubishi EndeavorV6-3.8LService typeSerpentine/Drive Belt ReplacementEstimate$287.80Shop/Dealer Price$324.60 - $426.90
2005 Mitsubishi EndeavorV6-3.8LService typeSerpentine/Drive Belt ReplacementEstimate$278.79Shop/Dealer Price$313.82 - $414.80
2008 Mitsubishi EndeavorV6-3.8LService typeSerpentine/Drive Belt ReplacementEstimate$278.79Shop/Dealer Price$313.85 - $414.84
2011 Mitsubishi EndeavorV6-3.8LService typeSerpentine/Drive Belt ReplacementEstimate$278.79Shop/Dealer Price$313.85 - $414.84
2006 Mitsubishi EndeavorV6-3.8LService typeSerpentine/Drive Belt ReplacementEstimate$278.79Shop/Dealer Price$315.32 - $417.42
2010 Mitsubishi EndeavorV6-3.8LService typeSerpentine/Drive Belt ReplacementEstimate$278.79Shop/Dealer Price$313.99 - $415.09
2007 Mitsubishi EndeavorV6-3.8LService typeSerpentine/Drive Belt ReplacementEstimate$278.79Shop/Dealer Price$313.86 - $414.87
Show example Mitsubishi Endeavor Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

James

25 years of experience
835 reviews
James
25 years of experience
Endeavor 2008 - Serpentine/Drive Belt - Orlando, FL
Punctual professional and knowledgeable mechanic would highly recommend and request for future services.

Aaron

7 years of experience
8 reviews
Aaron
7 years of experience
Endeavor 2011 - Brake Pads - Van Nuys, CA
Very good Mecanic!

Ronnie

28 years of experience
65 reviews
Ronnie
28 years of experience
Endeavor 2008 - Door Mirror - Nashville, TN
Nice gentleman who got the job done quick. Great job!

Bryant

8 years of experience
568 reviews
Bryant
8 years of experience
Endeavor 2006 - Spark Plugs - Indianapolis, IN
Excellent mechanic! Knows his stuff and takes his time ensuring the job is done right!

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Mitsubishi Endeavor Serpentine/Drive Belt Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
800+
experts on our platform

Recent articles & questions

How to Change a Serpentine Belt
Learn how to install a serpentine belt and learn maintenance tips, alignment importance, and the role of tension for optimal vehicle performance.
How to Replace a Lost or Stolen Car Title in Texas
It’s It’s never a great feeling to lose something of importance, or worse yet have it stolen. So what if that item is your car title? Your car title is what proves you are the owner of your vehicle, and...
How to Get Infiniti Dealership Certified
Technician Orientation Program Certification for Infiniti vehicles

Motor oil.

10W40 synthetic is perfectly fine oil to use in your 150cc motorcycle engine. In fact the Motul 7100 10w40 oil is one of the better quality oils on the market in the motorsports market right now. The main difference between...

Check engine light, EGR.

Hi. The next step to take with this issue is to clean out the passages that EGR valve sits on top of. These passages get clogged up with carbon and causes the EGR valve to look bad to the computer...

Brake pedal height 4 inches too high.

Hi there. There is a lever that is attached to the brake pedal that has an adjustment screw. The screw was pushed out making the brake pedal higher than normal. Turn the screw inward and the pedal height should drop....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com