Mercury Milan Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(10)

Serpentine/Drive Belt Replacement Estimate for Mercury Milan

Mercury Milan Serpentine/Drive Belt Replacement costs $133 on average.

CarServiceEstimateShop/Dealer Price
2009 Mercury MilanL4-2.3LService typeSerpentine/Drive Belt ReplacementEstimate$215.95Shop/Dealer Price$257.34 - $353.61
2007 Mercury MilanV6-3.0LService typeSerpentine/Drive Belt ReplacementEstimate$153.01Shop/Dealer Price$183.68 - $247.76
2006 Mercury MilanL4-2.3LService typeSerpentine/Drive Belt ReplacementEstimate$195.95Shop/Dealer Price$237.36 - $333.64
2010 Mercury MilanV6-3.0LService typeSerpentine/Drive Belt ReplacementEstimate$106.95Shop/Dealer Price$126.09 - $155.60
2007 Mercury MilanL4-2.3LService typeSerpentine/Drive Belt ReplacementEstimate$195.95Shop/Dealer Price$237.37 - $333.67
2010 Mercury MilanL4-2.5LService typeSerpentine/Drive Belt ReplacementEstimate$195.29Shop/Dealer Price$236.53 - $332.32
2006 Mercury MilanV6-3.0LService typeSerpentine/Drive Belt ReplacementEstimate$158.01Shop/Dealer Price$188.55 - $252.52
2011 Mercury MilanL4-2.5LService typeSerpentine/Drive Belt ReplacementEstimate$200.29Shop/Dealer Price$241.77 - $337.74
Show example Mercury Milan Serpentine/Drive Belt Replacement prices

Serpentine/Drive Belt Replacement Service

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Mercury Milan Serpentine/Drive Belt Replacement services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Buick Enclave
The The 2012 Buick Enclave was created specifically for younger buyers and those with growing families who have a taste for luxury. The Enclave is available in four levels which include: base, convenience, leather, and premium. It has ample room...
How Long Does an Air Suspension Dryer Assembly Last?
Most Most modern cars use a system of gas-filled shocks and struts in the suspension system. Increasingly, though, vehicles are becoming equipped with air suspension systems. They are quite common in luxury cars, and also featured as upgrades on other...
P2105 OBD-II Trouble Code: Throttle Actuator Control System - Forced Engine Shutdown
P2105 P2105 trouble code definition Throttle Actuator Control System (TAC) - Forced Engine Shutdown What the P2105 code means This code is set when the PCM (Powertrain Control Module) has failed or the PCM has detected one or more problems...

Brakes feel loose

Hi. If by loose you mean a low pedal, you might have a hydraulic leak. The hydraulic system on your brakes is a sealed system. If you develop a leak, the pedal can go to the floor. Leaks can be...

hi my car wil rev until 4000 rpm only, what should i chek???

Hi there, thanks for writing in. This is a difficult question to answer with the limited information provided and not being able to see the car in person. This issue could be caused by several possible problems and only a...

Will timing belt make check engine light come on

If the timing belt breaks or if it has skipped a tooth, this can cause multiple check engine light codes to be stored in your vehicle's computer system. This will then illuminate the check engine light. before having any parts...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com