Mercury Capri Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Mercury Capri Water Pump Replacement is $249 with $95 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercury CapriL4-1.6L TurboService typeWater Pump ReplacementEstimate$985.40Shop/Dealer Price$1073.58 - $1301.65
1993 Mercury CapriL4-1.6LService typeWater Pump ReplacementEstimate$944.86Shop/Dealer Price$1025.08 - $1247.19
1994 Mercury CapriL4-1.6L TurboService typeWater Pump ReplacementEstimate$944.86Shop/Dealer Price$1025.20 - $1247.40
1991 Mercury CapriL4-1.6LService typeWater Pump ReplacementEstimate$857.26Shop/Dealer Price$936.48 - $1157.84
1994 Mercury CapriL4-1.6LService typeWater Pump ReplacementEstimate$944.86Shop/Dealer Price$1031.82 - $1258.99
1992 Mercury CapriL4-1.6LService typeWater Pump ReplacementEstimate$857.26Shop/Dealer Price$937.03 - $1158.80
1992 Mercury CapriL4-1.6L TurboService typeWater Pump ReplacementEstimate$857.26Shop/Dealer Price$936.54 - $1157.95
1991 Mercury CapriL4-1.6L TurboService typeWater Pump ReplacementEstimate$857.26Shop/Dealer Price$936.48 - $1157.84
Show example Mercury Capri Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Mercury Capri L4-1.6L Turbo - Heater Hoses - San Tan Valley, Arizona
Greg’s fantastic and goes above and beyond to help his clients.

Jahmar

19 years of experience
36 reviews
Jahmar
19 years of experience
Mercury Capri L4-1.6L - Alternator - Fort Lauderdale, Florida
Service technician was competent and quick. Got the job done without me having to deal with the hassles of normal repair shops (i.e. car drop off, getting ride to/from while it's being serviced, etc.), not to mention it being less expensive.

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Mercury Capri L4-1.6L Turbo - Valve Cover Gasket - San Tan Valley, Arizona
Great experience as always

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Mercury Capri L4-1.6L Turbo - Serpentine/Drive Belt - San Tan Valley, Arizona
Greg is great! Shows up, gets everything taken care of, and is very professional.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0
Number of Mercury Capri services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How Do Underbody Car Lights Work?
Your Your car has a number of important lights on it – headlights, turn signals, taillights, brake lights, running lights, and more. However, your options aren’t limited to what was installed by the automaker. You can install aftermarket taillights and...
A Buyer’s Guide to the 2012 Nissan GT-R
Sporty, Sporty, fast, aggressive – all those words apply to the 2012 Nissan GT-R. This track-inspired car manages to bring racecar-like performance to the street, and it does so in true Nissan style. Key Features It’s tough to choose specific...
Insurance Requirements for Car Registration in Illinois
In In order to drive a vehicle legally in the state of Illinois, you must carry several types of liability insurance. The minimum liability insurance required for vehicle owners in Illinois is as follows: $20,000 for Property Damage Liability, which...

Transmission shifting hard and thumps.

Hi there. Though there are many issues that can cause the transmission to shift hard in your Cadillac there are some common problems. If the check engine light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection)is not on, the problem can be caused by a bad engine...

Check Engine Light is on and engine is quaking and stalling - 2006 Mercedes Benz C55 AMG

Hello. If the Check Engine Light has come on, then that means the computer has detected some sort of issue. I would rescan the computer to see if the same code has returned, even after cleaning the sensor. If cleaning...

How much does it cost to tint the windows of my Honda Accord?

Hi Art, thanks for your question. The rules and regulations for window tinting in California (https://www.yourmechanic.com/article/the-guide-to-legal-car-modifications-in-california-by-valerie-mellema) indicate that front side windows must allow over 70% of the light through but rear and back side windows can have any tint darkness....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com