Mercedes-Benz SLK300 Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a Mercedes-Benz SLK300 Fuel Pump Replacement is $591 with $325 for parts and $266 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Mercedes-Benz SLK300V6-3.0LService typeFuel Pump ReplacementEstimate$1435.39Shop/Dealer Price$1730.96 - $2590.03
2009 Mercedes-Benz SLK300V6-3.0LService typeFuel Pump ReplacementEstimate$1417.82Shop/Dealer Price$1707.36 - $2561.91
2010 Mercedes-Benz SLK300V6-3.0LService typeFuel Pump ReplacementEstimate$1417.82Shop/Dealer Price$1707.45 - $2562.06
2016 Mercedes-Benz SLK300L4-2.0L TurboService typeFuel Pump ReplacementEstimate$928.12Shop/Dealer Price$1096.98 - $1589.67
Show example Mercedes-Benz SLK300 Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0

Luis

16 years of experience
244 reviews
Luis
16 years of experience
Mercedes-Benz SLK300 V6-3.0L - Valve Cover Gasket - Las Vegas, Nevada
Luis showed up on time ready to work on a Sunday he finished the job 2 hours ahead of schedule and it was under the price he quoted me which was a plus.

Anthony

8 years of experience
195 reviews
Anthony
8 years of experience
Mercedes-Benz SLK300 V6-3.0L - Electric Problems - Elk Grove, California
ARRIVED ON TIME

Patrick

12 years of experience
159 reviews
Patrick
12 years of experience
Mercedes-Benz SLK300 V6-3.0L - Brake System Flush - Scottsdale, Arizona
Patrick figured out what was really wrong with the car versus the previous mechanic who misdiagosed....was without a car for 4 days and instead of the starter was the battery...which took less than an hour.

Brandon

19 years of experience
318 reviews
Brandon
19 years of experience
Mercedes-Benz SLK300 V6-3.0L - Brake Pads Replacement (Rear) - Morrisville, North Carolina
Had two appointments with Brandon, initially was little worried about this service, but he was excellent and very professional by work. Recommended service from Yourmechanic, very reasonable prices compared to the regular service providers.

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0
Number of Mercedes-Benz SLK300 services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Should You Buy a Dash Cam?
If If you’re someone who loves to watch viral videos on social media, you’re going to be familiar with dash cam videos. You know the ones - car crashes caught on camera through the windshield of a car, massive explosions...
P2534 OBD-II Trouble Code: Ignition Switch Run/Start Position Circuit Low
P2534 P2534 code definition A P2534 trouble code indicates that the PCM has detected a problem in the ignition switch run position circuit. Codes related to a P2534 trouble code include: P2530, P2531, P2532, P2533, P2535, P2536, P2537, and P2538....
P0629 OBD-II Trouble Code: Fuel Pump "A" Control Circuit High
P0629 means there is an issue with the "A" control circuit in the fuel pump often due too bad connectors/wires or a defective CAN bus.

Loose headlight clip

A loose clip can allow moisture inside the connection and cause a headlight bulb to stop working, such as what you are experiencing with your Mazda 3. It is also possible that the clip came loose on its own due...

My car is lean on bank one and two. Are the oxygen sensors bad?

It is certainly possible that the (pre-cat) O2 sensors were leaning the engine out. It is also possible there is a fuel supply issue: clogged fuel filter, weak fuel pump, fuel pump relay with burned contacts, or a fuel pressure...

I start the car when it's cold. It starts normal then almost dies then returns to normal idle. Now it hesitates on acceleration.

Hi there. Check the idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) (IAC) and see if its working. The IAC is designed to make the engine run at idle in all climate conditions. Also, check the mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) (MAF) and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com