Mercedes-Benz SL500 Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(115)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(115)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Mercedes-Benz SL500 Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Mercedes-Benz SL500V8-5.0LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1994 Mercedes-Benz SL500V8-5.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1998 Mercedes-Benz SL500V8-5.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2005 Mercedes-Benz SL500V8-5.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2004 Mercedes-Benz SL500V8-5.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2002 Mercedes-Benz SL500V8-5.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1995 Mercedes-Benz SL500V8-5.0LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2003 Mercedes-Benz SL500V8-5.0LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Mercedes-Benz SL500 Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(115)

Rating Summary
107
8
0
0
0
107
8
0
0
0

Justin

8 years of experience
372 reviews
Justin
8 years of experience
Mercedes-Benz SL500 V8-5.0L - Battery - Boca Raton, Florida
Nice guy. Fast and efficient.

Anthony

28 years of experience
113 reviews
Anthony
28 years of experience
Mercedes-Benz SL500 V8-5.0L - Starter - Bellport, New York
Great mechanic, very knowledgeable,

Jose

12 years of experience
81 reviews
Jose
12 years of experience
Mercedes-Benz SL500 V8-5.0L - Brakes, Steering and Suspension Inspection - Moreno Valley, California
Jose was very knowledgeable and well prepared. Very thorough and professional.

Vladimir

10 years of experience
214 reviews
Vladimir
10 years of experience
Mercedes-Benz SL500 V8-5.0L - Pre-purchase Car Inspection - Sacramento, California
Very helpful

Excellent Rating

(115)

Rating Summary
107
8
0
0
0
107
8
0
0
0
Number of Mercedes-Benz SL500 services completed
1265+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0067 OBD-II Trouble Code: Air Assisted Injector Control Circuit High
P0067 P0067 trouble code definition Air Assisted Injector Control Circuit High What the P0067 code means The P0067 code means that the powertrain control module (PCM) is detecting a higher voltage from the air assisted injector system circuit than was...
B1998 OBD-II Trouble Code: Passenger Side Side-Mount Air Bag Circuit Open
B1998 trouble code means there's a problem with the passenger side side-mount air bag, caused by damaged electrical components, such as blown fuses.
P0332 OBD-II Trouble Code: Knock Sensor 2 Circuit Low Input (Bank 2)
Trouble code P0332 means the PCM is receiving a reading that the knock sensor is too low, which can result in higher emissions and engine problems.

My automatic shifter will vibrate hard when I'm going over 80 and my car also would shake a bit

Hi there. Not sure what roads you can travel over 80mph but several things may cause this issue. One possibility is having broken or sagging transmission/engine mounts (https://www.yourmechanic.com/services/engine-mount-replacement). Another possibility is a driveline vibration caused by worn CV joints (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement)...

Sputtering and other things - 2004 Ford Taurus

Hi there. Typically the issue you're describing is ignition or fuel delivery related. It could be as simple as a crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) that is faulty or as complex as a fuel / air mixture issue caused by a faulty...

i have a 2006 ford fusion and the bushings are rubbing which is making a squeaking noise how urgent is it ?

Any noise coming from the control arms (https://www.yourmechanic.com/services/control-arm-assembly-replacement) or any part of the suspension should be addressed as soon as possible. The control arms typically mount to the spindle with a ball joint and to the engine / suspension cradle...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com