Mercedes-Benz SL320 Idle Control Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Idle Control Valve Replacement Service

How much does a Idle Control Valve Replacement cost?

On average, the cost for a Mercedes-Benz SL320 Idle Control Valve Replacement is $1361 with $1266 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Mercedes-Benz SL320L6-3.2LService typeIdle Control Valve ReplacementEstimate$2647.29Shop/Dealer Price$3297.87 - $5210.22
1995 Mercedes-Benz SL320L6-3.2LService typeIdle Control Valve ReplacementEstimate$2627.29Shop/Dealer Price$3277.90 - $5190.27
1996 Mercedes-Benz SL320L6-3.2LService typeIdle Control Valve ReplacementEstimate$2627.29Shop/Dealer Price$3277.90 - $5190.27
1994 Mercedes-Benz SL320L6-3.2LService typeIdle Control Valve ReplacementEstimate$2627.29Shop/Dealer Price$3277.86 - $5190.20
Show example Mercedes-Benz SL320 Idle Control Valve Replacement prices

What is the Idle Control Valve all about?

The Idle Control Valve is designed to control and maintain a consistent engine idle speed. The valve helps counter anything the driver may do to put extra load on the engine, such as turn on the air conditioning, sound systems, lights, etc. When the car is cold, the idle control valve helps the engine start.

Keep in mind:

The idle control valve usually goes bad because of excessive carbon buildup in the intake manifold.

How it's done:

  • Scan the computer system in the car for codes.
  • Check for any vacuum leaks.
  • Check electrical connections.
  • Remove and replace the idle air control valve if faulty.
  • Clean carbon out of intake manifold ports.
  • Clear Engine Check light.

Our recommendation:

It is a good idea to get an air induction service performed every 3 to 4 years. This will ensure that the carbon does not build up on the valve. When you are getting the idle control valve replaced, your mechanic should inspect the vacuum lines for leaks. If the vacuum is leaking, it will mimic the symptoms of a bad IAC valve.

What common symptoms indicate you may need to replace the Idle Control Valve?

  • When the engine is idle, (car not moving), the engine may stall.
  • Excessive racing noise from the engine.
  • Engine may shut off if AC is turned on.
  • Check Engine light is on.

How important is this service?

The idle control valve is responsible for maintaining a constant and consistent engine. It achieves this by ensuring that the idle speed is always constant. Many factors – such as a cold engine, the radio, or the air conditioning – effect the idling speed of the engine, so the idle control valve neutralizes these outside factors, and makes sure that the engine is consistently idling at a stable speed. When the idle control valve malfunctions, the idling speed is no longer regulated. This means that if you turn on the radio or the air conditioning, which requires power, your engine may stall. It also means that your vehicle may not be able to turn on.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Maurice

21 years of experience
39 reviews
Maurice
21 years of experience
Mercedes-Benz SL320 L6-3.2L - Fuel is leaking from gas tank - Charleston, South Carolina
On time. Gracious. Patient. Analytical. Knowledgeable.

Jarius

21 years of experience
49 reviews
Jarius
21 years of experience
Mercedes-Benz SL320 L6-3.2L - Car Battery Replacement - Silver Spring, Maryland
Jarius Foster was early for the appointment, very courteous, efficient and skilled. While I was expecting an hour long visit, Mr. Foster was finish in just 30 minutes. I would recommend him to all.

Chris

15 years of experience
312 reviews
Chris
15 years of experience
Mercedes-Benz SL320 L6-3.2L - Back To School Promo - San Diego, California
Chris does excellent work, he gets right down to business and finishes ASAP so you can get on with your day!

Robert

12 years of experience
125 reviews
Robert
12 years of experience
Mercedes-Benz SL320 L6-3.2L - Car is not starting - Silver Spring, Maryland
Robert was early to our appointment, diligent, thorough, personable, efficient and friendly.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mercedes-Benz SL320 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Booster Vacuum Pump
Diesel vehicles that have a stiff brake pedal with power brakes working intermittently may need to have the brake booster vacuum pump replaced.
P0493 OBD-II Trouble Code: Fan Overspeed
P0493 means there's a voltage problem with the electric cooling fan control system due to a faulty fan motor, fan relay, wiring, fan fuse, or sensor.
How to Replace an Evaporation Vent Solenoid
Emissions are regulated in part by the EVAP vent solenoid which goes bad when your car fails emissions testing or has extra pressure in the gas tank.

When I push the gas the RPM go up and down and don't got power the RPM going to down when I stop and the light is overhet

Hello. From what you describe it would appear that your vehicle is overheating at stops, and then cooling off when it gets moving. This can be caused by a few different problems. A few common causes are: clogged radiator malfunctioning...

Excessive oil loss with P0013 Camshaft OCV error code.

Your mention of the dealer putting in a cheap seal make me wonder if you had work done previously to the vehicle. These models have timing chains that tend to stretch as they wear and cause check engine lights, poor...

Broken bolt in tensioner pulley. How to remove

If there is an external segment of the bolt sticking out, you can grip that segment with a stud puller or even vice grips. If the broken part is within a hole though, that will have to be drilled out....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com