Mercedes-Benz SL320 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Mercedes-Benz SL320 Front Crankshaft Seal Replacement is $271 with $14 for parts and $256 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Mercedes-Benz SL320L6-3.2LService typeFront Crankshaft Seal ReplacementEstimate$339.45Shop/Dealer Price$393.96 - $451.13
1996 Mercedes-Benz SL320L6-3.2LService typeFront Crankshaft Seal ReplacementEstimate$285.45Shop/Dealer Price$340.04 - $397.28
1994 Mercedes-Benz SL320L6-3.2LService typeFront Crankshaft Seal ReplacementEstimate$342.45Shop/Dealer Price$407.54 - $472.67
1995 Mercedes-Benz SL320L6-3.2LService typeFront Crankshaft Seal ReplacementEstimate$285.45Shop/Dealer Price$339.93 - $397.08
Show example Mercedes-Benz SL320 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Chris

15 years of experience
312 reviews
Chris
15 years of experience
Mercedes-Benz SL320 L6-3.2L - Back To School Promo - San Diego, California
Chris does excellent work, he gets right down to business and finishes ASAP so you can get on with your day!

Attila

19 years of experience
906 reviews
Attila
19 years of experience
Mercedes-Benz SL320 L6-3.2L - Battery - Avenel, New Jersey
Outstanding

Jarius

21 years of experience
49 reviews
Jarius
21 years of experience
Mercedes-Benz SL320 L6-3.2L - Car Battery Replacement - Silver Spring, Maryland
Jarius Foster was early for the appointment, very courteous, efficient and skilled. While I was expecting an hour long visit, Mr. Foster was finish in just 30 minutes. I would recommend him to all.

Robert

12 years of experience
125 reviews
Robert
12 years of experience
Mercedes-Benz SL320 L6-3.2L - Car is not starting - Silver Spring, Maryland
Robert was early to our appointment, diligent, thorough, personable, efficient and friendly.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mercedes-Benz SL320 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P2074 OBD-II Trouble Code: Manifold Absolute Pressure/Mass Airflow - Throttle Position Correlation at Higher Load
P2074 P2074 code definition Manifold Absolute Pressure/Mass Airflow - Throttle Position Correlation at Higher Load What the P2074 code means P2074 is an OBD-II generic code for the Engine Control Module (ECM) detecting a final mass airflow adaption stored value...
P0897 OBD-II Trouble Code: Transmission Fluid Deteriorated
P0897 means the engine control module has detected that the transmission fluid is deteriorated, possibly due to low or dirty fluid levels.
How to Troubleshoot Car Overheating Causes
Car overheating can be caused by low coolant, a faulty radiator fans, a broken serpentine belt, or a stuck thermostat. Stop driving an overheated car.

I hear a rattling noise when my truck is parked. But when I drive it the noise stops. It sounds like a metal ball is rattling around.

Often, some exhaust components like heat shields or hangers may rust or become loose and rattle (https://www.yourmechanic.com/services/loud-squealing-or-rattling-is-coming-from-engine-inspection) over time and is pretty common for the type of sound you're describing. If you are not experiencing any drivability concerns, the rattle...

My car will not move at all in any gear. It starts up fine but does not move in gear.

Hi there. Check the shifting cable from the shifter housing to the transmission and see if its out of adjustment. A shifter cable that is out of adjustment will cause the shifter on the transmission to be out of sync...

New alternator new battery car only runs till battery dies

Hi There, You may have a failing voltage regulator that could be allowing the alternator to supply too much or too little amperage to the battery resulting in the battery never maintaining a consistent charge as it is designed to....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com