Mercedes-Benz S450 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(28)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(28)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Mercedes-Benz S450 Power Steering Pump Replacement is $705 with $420 for parts and $285 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Mercedes-Benz S450V8-4.7LService typePower Steering Pump ReplacementEstimate$1231.71Shop/Dealer Price$1475.90 - $2131.96
2008 Mercedes-Benz S450V8-4.7LService typePower Steering Pump ReplacementEstimate$1125.71Shop/Dealer Price$1365.95 - $2019.05
2009 Mercedes-Benz S450V8-4.7LService typePower Steering Pump ReplacementEstimate$1125.71Shop/Dealer Price$1365.95 - $2019.04
2010 Mercedes-Benz S450V8-4.7LService typePower Steering Pump ReplacementEstimate$1125.71Shop/Dealer Price$1365.88 - $2018.92
Show example Mercedes-Benz S450 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(28)

Rating Summary
28
0
0
0
0
28
0
0
0
0

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Mercedes-Benz S450 V6-3.0L Turbo - Pre-purchase Car Inspection - Culver City, California
Ricardo is very trustworthy, responsible, on time for the service , and fast reply.

Kenneth

20 years of experience
762 reviews
Kenneth
20 years of experience
Mercedes-Benz S450 V6-3.0L Turbo - Pre-purchase Car Inspection - Los Angeles, California
Kenneth is very friendly and easy to work with.

Torrieanto

12 years of experience
632 reviews
Torrieanto
12 years of experience
Mercedes-Benz GL450 V8-4.6L - Power Steering Pump - Tampa, Florida
I'm very pleased with Torrieanto's professionalism and work product. I highly recommend him!

Larry

16 years of experience
110 reviews
Larry
16 years of experience
Mercedes-Benz C240 V6-2.6L - Power Steering Pump - Columbus, Ohio
Larry his the best

Excellent Rating

(28)

Rating Summary
28
0
0
0
0
28
0
0
0
0
Number of Mercedes-Benz Power Steering Pump Replacement services completed
308+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

P0105 OBD-II Trouble Code: Manifold Air Pressure (MAP) Barometric Pressure Sensor Electrical Circuit Problem
P0105 P0105 Trouble code definition Manifold Air Pressure (MAP) Barometric Pressure Sensor Electrical Circuit Problem What the P0105 code means P0105 is the general code for a problem with the MAP circuit having an electrical failure or malfunction. The MAP...
Insurance Requirements for Car Registration in Iowa
Iowa Iowa is a rare state that does not specifically require vehicle insurance in order to legally register a car. You can operate a vehicle on the roads in Iowa without any car insurance if you wish. However, if you...
How to Reset a Car Alarm
A A car alarm that is not working at all or not working properly can be extremely annoying to you and your neighbors. It may also put your vehicle at an increased risk for theft (https://www.yourmechanic.com/article/how-to-keep-your-vehicle-safe-from-theft) or vandalism. Almost all...

my toyota Noah suddenly engine shuts down followed by loss of power after driving long distance at high speed.

Hi there: Unfortunately, we don't see a lot of Toyota Noah's here in the United States, so it's very difficult for us to help you diagnose your problem. However, in the US, when a vehicle like yours has this type...

engine

A crate motor is simply a "complete" motor, shipped in a crate of course. Complete means it has the head, valve train, camshafts and block (pistons, crankshaft, oil pump) already assembled. Crate motors can be "new" or "re-manufactured". Often, many...

Working on my 1976 k5 blazer. I checked to make sure the wires are connected to the distributor but am not getting any spark to the plugs. \

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com