Mercedes-Benz R500 Spark Plug Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Spark Plug Replacement Service

How much does a Spark Plug Replacement cost?

On average, the cost for a Mercedes-Benz R500 Spark Plug Replacement is $655 with $370 for parts and $285 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Mercedes-Benz R500V8-5.0LService typeSpark Plug ReplacementEstimate$1085.19Shop/Dealer Price$1322.75 - $1917.30
2006 Mercedes-Benz R500V8-5.0LService typeSpark Plug ReplacementEstimate$1025.19Shop/Dealer Price$1262.85 - $1857.46
Show example Mercedes-Benz R500 Spark Plug Replacement prices

What are spark plugs and how do they work?

Spark plugs are one of the key components of your vehicle’s ignition system. They ignite gasoline and air inside of your engine. This gives your engine the power to propel you down the road. The spark plug takes high voltage electricity from the ignition coil and creates a spark at just right moment during the engine’s combustion cycle. This gives the engine the best mix of power, fuel economy and low emissions. However, the electrode at the end of the spark plug eventually wears out and can cause performance issues.

Spark plugs-MATROX-1

When should you replace spark plugs?

Replacement should follow the vehicle maintenance schedule. This will be listed in the vehicle’s owner’s manual. Some cars require regular replacement at 30k, 60k or 100k miles. It is possible in some cases that a spark plug might fail before the service schedule, but it’s not typically common.

Avoiding spark plug replacement can cause:

  • Difficulty starting your car.
  • Check engine light for a misfire code.
  • Flashing check engine light during acceleration for misfire, this can cause engine damage.
  • Reduced fuel economy and/or power.
  • Rough idle and/or unexplained engine vibration.
  • Failed State emission testing.

Even if only one spark plug is found to be faulty, they should always be replaced in sets. Most engines will require 4,6, or 8 spark plugs.

How do mechanics replace spark plugs?

Spark plugs are threaded into the engine’s cylinder head(s). Most cars have one plug per cylinder, so a four-cylinder engine will have four plugs, a six-cylinder engine will have six plugs, and so forth. The mechanic will:

  • Have the correct spark plugs on hand for your vehicle
  • Pull any diagnostic trouble codes that may be related to worn spark plugs.
  • Remove the original spark plugs and look at removed spark plugs for any clues indicating engine mis-operation exists; such as oil burning, excessively rich mixture, pre-ignition damage etc. Inform owner of any found unusual conditions.
  • Install new plugs using a torque wrench.
  • Finally, a road test of the vehicle to confirm normal operation.

Is it safe to drive with worn spark plugs?

Yes, but spark plugs that are worn enough to cause engine-misfiring have the potential to cause engine damage and overheating of the catalytic converter. Regardless of the age of the plugs, or mileage, if the engine misfires or runs poorly, the plugs should be inspected for defects. Generally, spark plug failure will not keep the engine from running, but in cases of extreme wear, you may experience a limitation in the speed at which you can drive the car. If the maintenance schedule says the plugs should be replaced, it is best to do so promptly.

When having spark plugs replaced keep in mind:

  • High-speed driving may accelerate spark plug wear. Consider earlier than required inspection and tune-up if you operate the car in severe conditions.
  • Plugs should always be promptly replaced per the manufacturer maintenance schedule even if they appear to be working perfectly.
  • If your vehicle is equipped with spark plug wires (as opposed to a coil-on-plug system), the wires should be replaced at the same time. This may increase the cost of your repair.
  • It is possible that when doing a spark plug replacement, your vehicle may also need additional parts like ignition coils, this will add to the repair cost.
  • Some engines require that the intake manifold be removed while replacing spark plugs. This may increase the parts and labor cost for the repair.
  • Leaking valve cover gaskets, which have let oil get in contact with the spark plugs, coils or wires, may be the cause of ignition system issues. Valve cover gaskets will need to be replaced in addition to the spark plugs, wires or coils. This will add to the repair cost.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(10)

Rating Summary
9
0
0
0
1
9
0
0
0
1

Jamie

26 years of experience
30 reviews
Jamie
26 years of experience
Mercedes-Benz R500 V8-5.0L - Starter - North Charleston, South Carolina
Fantastic! Prompt and courteous. Completed job competently, reinstalled my battery and carpet without complaint and cleaned up the area. I would recommend him to anyone who needs service.

Daniel

8 years of experience
6 reviews
Daniel
8 years of experience
Mercedes-Benz R500 V8-5.0L - Alternator - North Charleston, South Carolina
Daniel communicated in advance of appointment, arrived a few minutes early and started work immediately after making sure of service required. He was knowledgeable, helpful and friendly. I'll request him for additional services.

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Mercedes-Benz R500 V8-5.0L - Brake Pads Replacement (Front) - Clinton, Maryland
Wonderfuj! Richard was very professional and courteous and explained everything he had done upon completion of the job. I was very satisfied as I was the first time I use Richard.

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Mercedes-Benz R500 V8-5.0L - Tune-up - Clinton, Maryland
Wonderfu, he was informative, skewered all questions and was very professional. I will definitely be using him again.

Excellent Rating

(10)

Rating Summary
9
0
0
0
1
9
0
0
0
1
Number of Mercedes-Benz R500 services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Renew Your Car Registration in Wyoming
The The state of Wyoming requires that all vehicles be registered once per year. Failure to do so means that your car will not be legal to drive on the roads. Proceeds from the renewal fees go to maintaining the...
P0119 OBD-II Trouble Code: ECT Sensor Circuit Intermittent Malfunction Problem
P0119 P0119 code definition Engine Coolant Temperature (ECT) sensor circuit intermittent malfunction problem. What the P0119 code means P0119 is the generic OBD-II code which indicates that the Engine Control Module (ECM) has detected intermittent ECT sensor input. What causes...
How to Replace an Anti-Lock Brake Fluid Level Sensor on Most Modern Cars
The anti-lock brake (ABS) system has a fluid level sensor that fails when the warning light comes on or if there is low fluid in the reservoir.

RPM fluctuates, car jumps at speed decrese

This sounds like a shifting issue. The transmission needs to select the proper gear based on how it is adapted when you come to a stop. If the shift is delayed, then the load on the engine will momentarily drop...

Constant clicking noise from flasher or blinker when neither of them are on

I do not think the issue is your blinker at all, but the A/C blend door or temperature door electronic actuators are clicking. Try to change the A/C from vent to floor or defrost and see if noise changes or...

HI I was driving home today and noticed while I was at a traffic light my oil light started to flicker.

Engine oil pressure may be below the requirement at idle. To determine that, temporarily install an external pressure gauge and verify that you have at least 5 PSI at idle, although you should compare against the pressure specification set forth...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com