Mercedes-Benz Maybach S650 Control Arm Assembly Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercedes-Benz Maybach S650 Control Arm Assembly Replacement is $400 with $232 for parts and $168 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2018 Mercedes-Benz Maybach S650V12-6.0L Turbo	Service typeControl Arm Assembly - Rear Lower Left Replacement	Estimate$649.32	Shop/Dealer Price$769.47 - $1120.20
2018 Mercedes-Benz Maybach S650V12-6.0L Turbo	Service typeControl Arm Assembly - Rear Upper Left Replacement	Estimate$734.33	Shop/Dealer Price$876.31 - $1297.32
2018 Mercedes-Benz Maybach S650V12-6.0L Turbo	Service typeControl Arm Assembly - Front Upper Right Replacement	Estimate$1353.02	Shop/Dealer Price$1611.60 - $2377.74
2018 Mercedes-Benz Maybach S650V12-6.0L Turbo	Service typeControl Arm Assembly - Front Lower Left Replacement	Estimate$796.21	Shop/Dealer Price$953.69 - $1421.13
2018 Mercedes-Benz Maybach S650V12-6.0L Turbo	Service typeControl Arm Assembly - Rear Lower Right Replacement	Estimate$638.51	Shop/Dealer Price$758.34 - $1108.82
2018 Mercedes-Benz Maybach S650V12-6.0L Turbo	Service typeControl Arm Assembly - Rear Upper Right Replacement	Estimate$734.33	Shop/Dealer Price$876.51 - $1297.66
2018 Mercedes-Benz Maybach S650V12-6.0L Turbo	Service typeControl Arm Assembly - Front Lower Right Replacement	Estimate$807.43	Shop/Dealer Price$967.74 - $1443.60
2018 Mercedes-Benz Maybach S650V12-6.0L Turbo	Service typeControl Arm Assembly - Front Upper Left Replacement	Estimate$1323.80	Shop/Dealer Price$1575.07 - $2319.29

Show example Mercedes-Benz Maybach S650 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(28)

Rating Summary

26

2

0

0

0

26

2

0

0

0

SEE REVIEWS NEAR ME

Alex

23 years of experience

25 reviews

Alex

23 years of experience

by Tom

Mercedes-Benz E350 V6-3.5L - Control Arm Assembly Replacement (Front Lower Left) - Monrovia, California

On time, and very professional .

Elias

15 years of experience

225 reviews

Elias

15 years of experience

by Quentin

Mercedes-Benz CLK350 V6-3.5L - Control Arm Assembly Replacement (Front Lower Right) - Staten Island, New York

Awesome and quick job

Matthew

13 years of experience

183 reviews

Request Matthew

Matthew

13 years of experience

Request Matthew

by Journey

Mercedes-Benz E320 V6-3.2L - Control Arm Assembly Replacement (Front Lower Left) - Indianapolis, Indiana

Very hard and fast working man.

Andy

5 years of experience

27 reviews

Andy

5 years of experience

by Liz

Mercedes-Benz S500 V8-5.0L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Pearland, Texas

Such a beautiful personality and Andy is a very skilled mechanic.. I plan to have Andy continue working on my Mercedes Benz when needed.. he is 5 STAR ⭐️ PLUS

Excellent Rating

(28)

Rating Summary

26

2

0

0

0

26

2

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

How to Replace a Windshield Wiper Module

Car windshield wiper modules control the wiper speed. If windshield wipers aren't working, replace them immediately.

A 12 Point Guide to Electric Vehicle Tax Credits

Fully electric and plug-in hybrid cars bought after 2010 may be eligible for an up to $7,500 tax credit.

What Sensors Do All Cars Have? And What Optional Ones Are There?

Modern cars have an increasing amount of sensors. Most cars have an oxygen sensor and a throttle position sensor, but parking sensors are optional.

Battery was replaced. In the morning when crunk to let warm up, after 2 min. It shuts off. When going to restart it takes a minute

This may be likely related to what is called an idle air control valve/module. This unit regulates the air flow into the motor at idle or low speeds as it is mixed with fuel prior to being injected into the...

I just want to know the location for fuel rail pressure sensor for hummer h2 model 2008

Hi and thanks for contacting YourMechanic. Look on the fuel rail to your engine and you will see two lines that will meet to the rail on one side. Right just before the two lines, you will see a sensor...

Why do I have to jump start my car?

This is generally a sign of a weak battery or a failing alternator. If the car starts without any problem when being jumped, this is generally a sign of a lack of power from the battery which means either the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com