Mercedes-Benz E53 AMG Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(554)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(554)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Mercedes-Benz E53 AMG Brake Pad Replacement is $270 with $130 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Mercedes-Benz E53 AMGL6-3.0L Turbo HybridService typeBrake Pads - Front ReplacementEstimate$500.06Shop/Dealer Price$582.90 - $821.68
2020 Mercedes-Benz E53 AMGL6-3.0L Turbo HybridService typeBrake Pads - Front ReplacementEstimate$406.95Shop/Dealer Price$474.02 - $671.12
2021 Mercedes-Benz E53 AMGL6-3.0L Turbo HybridService typeBrake Pads - Front ReplacementEstimate$489.25Shop/Dealer Price$569.99 - $807.21
2020 Mercedes-Benz E53 AMGL6-3.0L Turbo HybridService typeBrake Pads - Rear ReplacementEstimate$436.15Shop/Dealer Price$503.62 - $701.01
2021 Mercedes-Benz E53 AMGL6-3.0L Turbo HybridService typeBrake Pads - Rear ReplacementEstimate$436.15Shop/Dealer Price$505.39 - $704.10
2019 Mercedes-Benz E53 AMGL6-3.0L Turbo HybridService typeBrake Pads - Front ReplacementEstimate$651.93Shop/Dealer Price$780.41 - $1161.37
2019 Mercedes-Benz E53 AMGL6-3.0L Turbo HybridService typeBrake Pads - Rear ReplacementEstimate$436.15Shop/Dealer Price$503.64 - $701.04
2022 Mercedes-Benz E53 AMGL6-3.0L Turbo HybridService typeBrake Pads - Rear ReplacementEstimate$489.25Shop/Dealer Price$569.99 - $807.21
Show example Mercedes-Benz E53 AMG Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(554)

Rating Summary
519
22
5
3
5
519
22
5
3
5

Harish

28 years of experience
588 reviews
Harish
28 years of experience
Mercedes-Benz C230 V6-2.5L - Brake Pads Replacement (Front) - Charlotte, North Carolina
Was nervous at first about dealing with mobile mechanics I've had a bad experience in the past but now I'm glad I chose to give it another shot! Very pleased with everything. Harish knows what he's doing he did not try to hustle me. So from now on he is my mechanic.

Joseph

28 years of experience
578 reviews
Joseph
28 years of experience
Mercedes-Benz ML350 V6-3.5L - Brake Pads Replacement (Rear) - Sugar Land, Texas
Excellent service. We will use him again next time we need repairs.

David

28 years of experience
182 reviews
David
28 years of experience
Mercedes-Benz E500 V8-5.0L - Brake Pads Replacement (Front, Rear) - Daly City, California
Very thorough in completing the task. Able to remedy the situation even when the incorrect parts was provided. Very knowledgable on european vehicles.

Brandon

19 years of experience
318 reviews
Brandon
19 years of experience
Mercedes-Benz CLK430 V8-4.3L - Brake Pads Replacement (Front) - Durham, North Carolina
Second time working with Brandon! Great experience!

Excellent Rating

(554)

Rating Summary
519
22
5
3
5
519
22
5
3
5
Number of Mercedes-Benz Brake Pad Replacement services completed
6094+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does an Electronic Spark Control Last?
The The job of the electronic spark control is to control the engine timing. This part can also be called the "knock sensor", as it monitors any unusual knocking, or vibration that may be happening in the engine. This is...
Symptoms of a Bad or Failing Electronic Spark Control
Common signs include engine performance issues, engine stalling, the car not starting, and the engine not sparking.
Windshield Laws in New Jersey
Driving Driving on the roadways in New Jersey requires knowledge of the rules of the road in order to be safe and legal. In addition to those laws, however, motorists must also comply with regulations concerning the windshield and windows...

Car ran out of gas

If your vehicle ran out of gas, and after adding gas it still doesn't start, you may have burned out the fuel pump. The fuel pump in most cars is housed in the gas tank. It lives submerged in the...

Topped off coolant with Prestone Universal Coolant. Manual says to use MOPAR HOAT. Do I need to get a flush before a long trip?

Not knowing which exact type of coolant was used to refill the system after the block heater install, I would consider flushing the cooling system and refilling with the correct coolant. Years ago, we just had "green coolant that went...

Rocking steering wheel, vibrating car

You should have the tires, rims and suspension checked for damage. You may have bent the rim or damaged tire or suspension.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com