Mercedes-Benz E500 Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(83)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(83)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Mercedes-Benz E500 Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Mercedes-Benz E500V8-5.0LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2006 Mercedes-Benz E500V8-5.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2005 Mercedes-Benz E500V8-5.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2003 Mercedes-Benz E500V8-5.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
1994 Mercedes-Benz E500V8-5.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
Show example Mercedes-Benz E500 Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(83)

Rating Summary
74
5
2
0
2
74
5
2
0
2

Kevin

24 years of experience
535 reviews
Kevin
24 years of experience
Mercedes-Benz E500 V8-5.0L - Crankshaft Position Sensor Replacement - Norcross, Georgia
Very professional and knowledgeable!!!

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
Mercedes-Benz E500 V8-5.0L - Oil Change - Sacramento, California

Nazareth

27 years of experience
276 reviews
Nazareth
27 years of experience
Mercedes-Benz E500 V8-5.0L - Brake Pads Replacement (Front) - Montebello, California
Expert

Eric

15 years of experience
133 reviews
Eric
15 years of experience
Mercedes-Benz E500 V8-5.0L - Other Inspections - Washington, District of Columbia
Eric was very professional and I would recommend him.

Excellent Rating

(83)

Rating Summary
74
5
2
0
2
74
5
2
0
2
Number of Mercedes-Benz E500 services completed
913+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Take Gum Off Car Upholstery
Accidents Accidents happen for many different reasons, and some of those instances occur in your vehicle. All accidents (https://www.yourmechanic.com/article/how-to-clean-liquid-spills-on-car-upholstery-by-jason-unrau) are a shame, but if gum happens to get stuck on a seat, it can be really ugly and nasty. But...
P3425 OBD-II Trouble Code: Cylinder 4 Deactivation/Intake Valve Control Circuit/Open
P3425 means the PCM is not receiving the proper values from the MAP, MAF, and TP sensors to enter 4 cylinder mode due to low oil level or pressure.
The Guide to Cracked Windshield Laws in All States
It It goes without saying that a driver needs to be able to see well in order to drive safely. Because of this, there are certain laws and rules that govern the quality that a vehicle’s windshield must be in....

Car shakes when braking

Hi there. This is a very common issue, and the culprit is usually warped front brake rotors. When you apply the brakes, the calipers squeeze the brake pads onto the warped rotors, causing vibration to be transmitted through the suspension...

My car studders when the gas pedal is pressed.

This may be a sign of a failing throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement). The throttle position sensor (TPS) is a sensor used to monitor the throttle position of a vehicle. The sensor is usually located on the butterfly spindle/shaft so that...

Replaced throttle position sensor,disconnected battery terminals to try idle reset,still no acceleration and high idle.

Hi Jeff. Thanks for sending your question today. Since you're receiving multiple codes that essentially are related to the same components, I would first recommend resetting the codes correctly, by having a professional mechanic access the OBD-II from the ECU...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com