Mercedes-Benz CLS550 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(86)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(86)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz CLS550 Power Steering Pressure Hose Replacement is $616 with $364 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Mercedes-Benz CLS550V8-4.7L TurboService typePower Steering Pressure Hose ReplacementEstimate$1105.30Shop/Dealer Price$1307.81 - $1898.33
2007 Mercedes-Benz CLS550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$1033.90Shop/Dealer Price$1222.47 - $1773.01
2011 Mercedes-Benz CLS550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$990.10Shop/Dealer Price$1177.79 - $1727.67
2009 Mercedes-Benz CLS550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$1033.90Shop/Dealer Price$1222.56 - $1773.17
2010 Mercedes-Benz CLS550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$990.10Shop/Dealer Price$1182.43 - $1735.79
2008 Mercedes-Benz CLS550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$1033.90Shop/Dealer Price$1223.07 - $1774.07
2012 Mercedes-Benz CLS550V8-4.7L TurboService typePower Steering Pressure Hose ReplacementEstimate$1086.38Shop/Dealer Price$1285.26 - $1873.06
2014 Mercedes-Benz CLS550V8-4.7L TurboService typePower Steering Pressure Hose ReplacementEstimate$1086.38Shop/Dealer Price$1285.23 - $1873.01
Show example Mercedes-Benz CLS550 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(86)

Rating Summary
77
2
1
2
4
77
2
1
2
4

Adam

18 years of experience
124 reviews
Adam
18 years of experience
Mercedes-Benz CLS550 V8-5.5L - Starter - Houston, Texas
Adam was on time and finished on time. One of the first mechanics in my life that I was completely impressed with.

Jesse

18 years of experience
219 reviews
Jesse
18 years of experience
Mercedes-Benz CLS550 V8-4.7L Turbo - Clunking or knocking noise from wheels - San Antonio, Texas
Jesse was very friendly and knowledgeable in helping me understand what was wrong with my car.

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
Mercedes-Benz CLS550 V8-5.5L - Serpentine/Drive Belt - West Jordan, Utah
He did amazing! Will be booking him again!

Shane

18 years of experience
379 reviews
Shane
18 years of experience
Mercedes-Benz CLS550 V8-5.5L - Brakes, Steering and Suspension Inspection - Austin, Texas
He was very nice and worked very hard in the hot weather and gave me a great easy to understand breakdown.

Excellent Rating

(86)

Rating Summary
77
2
1
2
4
77
2
1
2
4
Number of Mercedes-Benz CLS550 services completed
946+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0255 OBD-II Trouble Code: Injection Pump Fuel Metering Control “A” Intermittent (Cam/Rotor/Injector)
P0255 P0255 code definition The P0255 OBD-II Trouble Code refers to a problem with the injection pump fuel metering control “A” intermittent (cam/rotor/injector). What the P0255 code means The powertrain control module has found an issue with the signal voltage...
How to Clean a Car With a Microfiber Cloth
Microfiber towels are a must-have for car detailing jobs. Use a microfiber towel to wash and dry the exterior when you're detailing your car.
A Buyer’s Guide to the 2012 Toyota Venza
The The 2012 Toyota Venza offers the best combination of the SUV and a sedan. It has ample headroom and legroom so passengers are comfortable for long rides, while offering a four-cylinder front-wheel drive version or V6 option all-wheel drive...

is it worth fixing the timing belt and timing pulleys?

If the belt is broken (https://www.yourmechanic.com/services/timing-belt-replacement) or the engine is noisy and having problem, then no, it probably wouldn't be worth purchasing (https://www.yourmechanic.com/article/how-to-buy-a-used-car). For whichever car that you are seriously considering moving forward with, I suggest having a certified mechanic...

Car dies when put into gear

Hi there. From the description you have given, of your vehicle's engine dieing, it could be several things. Assuming, there is no Check Engine Light on, leads me to believe, the vehicle computer is not recognizing the fault. It could...

High rpm at low speeds first 5-10 minutes of driving

There are some engine controls that affect transmission shift points, such as the throttle position sensor. Those have to be ruled out. If it does turn out to be a transmission issue, check the fluid level and condition. Beyond simple...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com