Mercedes-Benz CLS55 AMG Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercedes-Benz CLS55 AMG Control Arm Assembly Replacement is $239 with $144 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mercedes-Benz CLS55 AMGV8-5.5L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$843.31Shop/Dealer Price$1050.39 - $1615.39
2006 Mercedes-Benz CLS55 AMGV8-5.5L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$780.77Shop/Dealer Price$977.26 - $1510.38
2006 Mercedes-Benz CLS55 AMGV8-5.5L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$685.85Shop/Dealer Price$860.82 - $1233.57
2006 Mercedes-Benz CLS55 AMGV8-5.5L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$383.71Shop/Dealer Price$480.88 - $716.16
2006 Mercedes-Benz CLS55 AMGV8-5.5L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$809.34Shop/Dealer Price$1017.02 - $1414.31
2006 Mercedes-Benz CLS55 AMGV8-5.5L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$383.71Shop/Dealer Price$480.93 - $716.26
2006 Mercedes-Benz CLS55 AMGV8-5.5L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$785.77Shop/Dealer Price$981.92 - $1514.78
2006 Mercedes-Benz CLS55 AMGV8-5.5L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$828.31Shop/Dealer Price$1036.03 - $1601.49
Show example Mercedes-Benz CLS55 AMG Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mercedes-Benz CLS55 AMG services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

5 Essential Things to Know About Fuel Economy
Fuel Fuel economy, which is how far a particular car will go on a gallon of fuel when driving in the city or on the highway, is almost always an important consideration when purchasing a vehicle. However, while the car...
How to Buy Good Quality Brake Pads
Brake Brake pads sound cushy - however they’re anything but soft and snuggly. These components attach to the brake calipers in order to stop the discs (also known as rotors). The calipers squeeze the pads against the discs, which are...
P0732 OBD-II Trouble Code: Gear 2 Incorrect Ratio
P0732 code identifies an issue with the vehicles automatic transmission often due too low transmission fluid or broken/faulty PCM.

Turns over really slow then fires up and starts and around 70 MPh rpms jump up and it shifts into an almost 1/2 neutral 1/2 drive

Hello. From what you describe it would appear that your vehicle is experiencing more than one issue. In regards to your starting issue, slow cranking is usually caused by a bad battery (https://www.yourmechanic.com/services/battery-replacement) or starter (https://www.yourmechanic.com/services/starter-replacement). I would start by...

I had my timing belt and water pump replaced 45000 miles ago. Now I am told I need to replace water pump. Is this normal?

Hello there, 45,000 miles is a short lifespan for a water pump (https://www.yourmechanic.com/article/how-long-does-a-water-pump-last) on your 2000 Honda Odyssey. There are a few reasons the water pump will need to be replaced, such as a pump bearing failure, water pump seal...

Where is the crankshaft sensor on a 2011 vw cc sport 2.0

The crankshaft sensor is in center of motor near flywheel even with starter on engine block.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com