Mercedes-Benz CL63 AMG Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(81)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(81)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Mercedes-Benz CL63 AMG Headlight Bulb Replacement is $167 with $27 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$217.68Shop/Dealer Price$242.35 - $296.11
2008 Mercedes-Benz CL63 AMGV8-6.3LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$221.85 - $268.05
2014 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$217.01 - $260.32
2008 Mercedes-Benz CL63 AMGV8-6.3LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$203.01Shop/Dealer Price$221.91 - $268.16
2011 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$225.59 - $274.60
2011 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$208.67Shop/Dealer Price$229.34 - $280.09
2010 Mercedes-Benz CL63 AMGV8-6.3LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$221.95 - $268.23
2009 Mercedes-Benz CL63 AMGV8-6.3LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$221.91 - $268.16
Show example Mercedes-Benz CL63 AMG Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(81)

Rating Summary
77
2
0
0
2
77
2
0
0
2

Jermaine

25 years of experience
382 reviews
Jermaine
25 years of experience
Mercedes-Benz CL63 AMG V8-5.5L Turbo - Oil Change - Greenbelt, Maryland
Good Job .

Dana

26 years of experience
13 reviews
Dana
26 years of experience
Mercedes-Benz CL63 AMG V8-5.5L Turbo - Oil Change - Fairfax, Virginia
Job well done .

David

14 years of experience
463 reviews
David
14 years of experience
Mercedes-Benz CL63 AMG V8-6.3L - Battery - Marietta, Georgia
Right on time. Great service.

Nicholas

22 years of experience
354 reviews
Nicholas
22 years of experience
Mercedes-Benz ML500 V8-5.0L - Headlight Bulb Replacement (Driver Side Low Beam) - Broomfield, Colorado
Showed up on time and did a great job.

Excellent Rating

(81)

Rating Summary
77
2
0
0
2
77
2
0
0
2
Number of Mercedes-Benz Headlight Bulb Replacement services completed
891+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

What Does the ABS Warning Light Mean?
The ABS light comes on due to anti-lock braking system issues. Causes include low brake fluid, a blown fuse, or abnormal signals from wheel sensors.
P2601 OBD-II Trouble Code: Coolant Pump Control Circuit Range/Performance
P2601 P2601 code definition The P2601 code is a general OBD-II diagnostic trouble code (DTC) that indicates a fault with the coolant pump control circuit range/performance. What the P2601 code means The coolant pump is an electronically controlled auxiliary pump...
How to Remove Wheel Locks
When When you have nice, new rims (https://www.yourmechanic.com/article/how-rims-work-and-why-they-matter) on your car, you won’t be the only one admiring them. Good-looking wheels draw the attention of car aficionados and thieves alike. Wheels are an easy mark for thieves. When you leave...

Transmission issue after a long drive

Do not change the fluid or have it flushed. This could cause the transmission to go out even sooner. There are a load of different additives out there that may or may not work, but when the transmission is going...

Grinding Sound and Squeak

Warped brake rotors can definitely cause a grinding sound depending on the severity of the warping and the thickness of the brake pads. This can also be caused by worn out wheel bearings as well. Over time the bearing will...

Misfire happens at 1500 rpm's.

Hi there. Check the fuel injectors one at a time by disconnecting the harness and see if the engine stumbles or not. If the engine stumbles when the injector is turned off, then the injector was working. If the engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com