Mercedes-Benz C43 AMG Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Mercedes-Benz C43 AMG Oxygen Sensor Replacement is $776 with $636 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Mercedes-Benz C43 AMGV8-4.3LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$1426.24Shop/Dealer Price$1753.05 - $2713.23
2000 Mercedes-Benz C43 AMGV8-4.3LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$1417.23Shop/Dealer Price$1739.62 - $2696.49
1999 Mercedes-Benz C43 AMGV8-4.3LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$1566.83Shop/Dealer Price$1926.69 - $2995.80
1998 Mercedes-Benz C43 AMGV8-4.3LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$1566.83Shop/Dealer Price$1926.68 - $2995.80
2000 Mercedes-Benz C43 AMGV8-4.3LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$1566.83Shop/Dealer Price$1930.37 - $3002.24
1998 Mercedes-Benz C43 AMGV8-4.3LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$1417.23Shop/Dealer Price$1740.04 - $2697.21
Show example Mercedes-Benz C43 AMG Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Jeremy

15 years of experience
482 reviews
Jeremy
15 years of experience
C43 AMG 1998 - Oil/Fluid Leak - Delray Beach, FL
Very honest, knowledegable and friendly guy. He's a car buff too and will talk about his cars!

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mercedes-Benz C43 AMG services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does an Evaporator Temperature Sensor (Switch) Last?
If If you have air conditioning in your vehicle, which pretty much all modern vehicles have, then you have an evaporator temperature sensor (switch). This switch plays an important role in making sure the correct temperature is attained, and that...
How Do Rain-Sensing Wipers Work?
Several Several decades ago, the only settings windshield wipers came with were low, high, and off. Later, an intermittent wiper feature was integrated into many windshield wiper switches, allowing drivers to reduce the frequency of wiper movements based on the...
How Long Does an EGR Temperature Sensor Last?
Are Are you familiar with the EGR (exhaust gas recirculation) system in your car? If not, this is something all modern cars have. The purpose of this system is to greatly reduce the amount of emissions produced by your car....

What is P0335 Crankshaft Position Sensor A Circuit and where is it located?

Hello - this message (P0335 (https://www.yourmechanic.com/article/p0335-obd-ii-trouble-code-crankshaft-position-sensor-a-circuit-malfunction-by-spencer-clayton)) indicates that the crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) is failing, causing the "cutting off" you have already noticed. It is located on the bottom of the engine/transmission interface (drivers side of the vehicle). To avoid...

ABS brakes grab (driver front) upon stopping.

Hey there. As you know, your car is equipped with wheel speed sensors at each of the four wheels which monitor wheel speed while relaying this information constantly to the ABS system which is controlled by the car's ECU. When...

I have a check engine on once a while when I hit a bump on the freeway and my echo goes away. Is it the motor mounts?

Hello. From what you describe it would appear that your vehicle has more than one issue present. The check engine light comes on when the computer detects an issue with the vehicle's engine management system. It will set off the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com