Mercedes-Benz AMG GT 63 Gears slipping when accelerating Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Gears slipping when accelerating Inspection Service

How much does a Gears slipping when accelerating Inspection cost?

On average, the cost for a Mercedes-Benz AMG GT 63 Gears slipping when accelerating Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 Mercedes-Benz AMG GT 63V8-4.0L TurboService typeGears slipping when accelerating InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2020 Mercedes-Benz AMG GT 63V8-4.0L TurboService typeGears slipping when accelerating InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz AMG GT 63 Gears slipping when accelerating Inspection prices

When you press the gas pedal and the transmission is in drive, you expect your vehicle to accelerate smoothly. That’s how things work when your transmission is healthy, but if you’re noticing that the gears are slipping when accelerating, there’s a serious problem that needs to be addressed as soon as possible.

How this system works:

Your transmission is a complex system with a very wide range of components. That’s true whether you have an automatic or a manual transmission. With that being said, slipping is much more common in an automatic transmission than in a manual, so we’ll focus our attention there. Really, the primary cause of slipping in a manual transmission is a damaged clutch, which should be replaced.

In an automatic transmission, everything must work in harmony in order to shift gears and provide power. The fluid level must be full (without the right amount of fluid, your transmission may slip badly), and it should be clean. You also have a number of clutch packs scattered throughout the transmission that need to engage at the right time. Transmission bands connect the gears together, and they can become worn or damaged over time.

If debris or contaminants clog up the system, or have blocked up the filter, it’s impossible for the transmission to work properly.

Common reasons for this to happen:

  • Low Transmission Fluid: If you’re of driving age, you’ve heard this one time and again, but it bears repeating. The number one cause of all transmission problems, from slipping to abnormal sounds, is low transmission fluid. If the fluid is low, a number of problems can crop up that will make the transmission slip, including overheating.

  • Fluid Is Burnt: Just as you need the right level of transmission fluid, you also need that fluid to be in good condition. Like engine oil, transmission fluid needs to be changed periodically, or it becomes burnt and the level of contaminants in the fluid can rise to dangerous levels.

  • Transmission Fluid Leaks: This one relates directly to low fluid, but it’s the cause of the transmission fluid being low. Transmission leaks can range from miniscule to catastrophic, but they all affect the level of fluid in your transmission.

  • Gear Wear: If you have a high-mileage vehicle with the original transmission, the gears may just be worn out. This applies even if you’ve taken care of the transmission with regular services. There are simply only so many miles the average transmission can operate. If your gears are worn, they won’t mesh together properly, creating slippage.

  • Broken Transmission Bands: Transmission bands connect the various gears in your transmission to one another. Over time (and particularly if you don’t maintain the transmission or drive with low fluid), they wear. Once they become too worn, or they break, your transmission will slip.

  • Failing Torque Converter: The torque converter is what transforms energy from the engine into something your transmission can use. They work with transmission fluid, so low fluid levels could cause damage here as well. Once the torque converter is damaged, your transmission will slip.

What to expect:

A top-rated mobile mechanic will come to your home or office to verify the operation of your transmission, including slipping and any abnormal noises. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your transmission and may need to pull trouble codes from the car’s computer via the OBD II interface. A test drive may also be necessary to verify that the transmission is slipping, as well as any unusual/abnormal sounds it might be making during operation.

How important is this service?

If your transmission is slipping, it’s crucial to have the problem repaired immediately. Even if it is slipping for something as simple as low fluid, that situation can quickly lead to very serious damage. One of our professional mechanics can diagnose the reason for the slippage and get your transmission back into good condition.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Evan

22 years of experience
6 reviews
Evan
22 years of experience
Mercedes-Benz GL550 V8-4.6L Turbo - Brake Rotor/Disc Replacement (Rear) - Pittsburgh, Pennsylvania
Very competent and professional. Saved me unnecessary costs. Mercedes dealership said I needed both front and back rotors. Evan inspected and told me they were fine. I was ready to replace both rotors but ended up doing just the rear ( which also could have been deferred). Also the cost of the job was much lower than what the dealership had quoted.

Diego

21 years of experience
564 reviews
Diego
21 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Power Seat is not working - Surprise, Arizona
Hands Down Best Mechanic in Az

Chet

41 years of experience
496 reviews
Chet
41 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Coolant is leaking - Chula Vista, California
Chet was punctual, thorough, and very professional. Easy going and easy to talk to. I wished that he worked more days, but it’s understandable. So far, I’m happy with Your Mechanic’s team of professionals

John

27 years of experience
1057 reviews
John
27 years of experience
Mercedes-Benz GLK350 V6-3.5L - Alternator - League City, Texas
John was everything that you would want from a professional. His knowledge was second to none and he made sure that we were back up and running in no time. John has set the bar and we will continue to use yourmechanic for our auto repair needs in the future.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

5 Essential Things to Know About Car Scams
As As if car buying isn't difficult enough, there are a variety of scams out there of which you need to be aware. From shiesty dealers to flat-out thieves, the following are five of the essential things to know about...
The Guide to Right-of-Way Laws in Wisconsin
Vehicles Vehicles and pedestrians are inevitably going to meet in traffic, and sometimes there will be no signal lights or signs to regulate the movement of traffic. That is why there are right-of-way laws in place – to identify who...
P0263 OBD-II Trouble Code: Cylinder Number 1 Contribution/Balance Fault
P0263 P0263 code definition Cylinder Number 1 Contribution/Balance Fault What the P0263 code means P0263 is an [OBD-II diagnostic trouble code] which indicates that the engine control module (ECM) (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) detected the cylinder number 1 having low contribution to the...

Is my alternator bad or my cables?

Hello. If the vehicle is only working when the charger is installed then there is high resistance in the vehicles electrical system. Most of the time it is caused by a bad positive battery cable (https://www.yourmechanic.com/services/battery-cable-replacement). I usually do a...

Can a side engine mount leak? 2003 Acura MDX

Hi there - yes, the motor mounts (https://www.yourmechanic.com/article/how-long-do-engine-motor-mounts-last) in your Acura are hydraulic, containing a small amount of fluid, and can leak if damaged, or if they fail. I would recommend an engine mount replacement (https://www.yourmechanic.com/services/engine-mount-replacement) by a mobile, professional...

So my traction control light was flashing on the highway then stayed on I pulled over turned off the car checked my wheels I didn'

Traction control involves wheel speed sensors, the ABS system, and electronic controllers. If there is a problem with the traction control system on your vehicle, diagnostic trouble codes are stored and those codes will provide the mechanic with the necessary...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com