Mercedes-Benz A250 Lubricate Driveshaft at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,558)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,558)

Lubricate Driveshaft Service

How much does a Lubricate Driveshaft cost?

On average, the cost for a Mercedes-Benz A250 Lubricate Driveshaft is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Mercedes-Benz A250L4-2.0L TurboService typeLubricate DriveshaftEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2019 Mercedes-Benz A250L4-2.0L TurboService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Mercedes-Benz A250L4-2.0L TurboService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz A250 Lubricate Driveshaft prices

What is lubricating the driveshaft all about?

Along the drivetrain, whenever torque needs to travel from one place to another, a driveshaft is used. Some cars have two driveshafts under them, usually for four-wheel-drive applications. U-Joints are couplings that hold sections of driveshaft together and can withstand large amounts of torque. The U-joint and the slip both need lubrication to work smoothly. This means lubricant needs to be applied to every point where the driveshaft meets another section of shaft or any other part of the vehicle.

Keep in mind:

  • While lubricating will help with scraping noise and minor vibration, it will not repair actually broken parts.
  • Inspect the parts of the the driveshaft to make sure they do not need full replacement.
  • Even small spots of excess wear are bad on parts that withstand so much torque, no problem is too small to be addressed on the driveshaft.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The slip joints and U-joints on all drive shafts are located
  • The Zerk grease fittings on the slip joint and U-joints are located
  • New grease is pumped into the grease fittings with a grease gun
  • The vehicle is lowered off of the jack stands

Our recommendation:

Check the manual of your vehicle to see if the manufacturer has specific instructions on servicing and lubricating the driveshaft. If the manufacturer suggests it is time for a service or if the vehicle has symptoms of a malfunctioning driveshaft, then it should be done immediately. These parts are under a lot of force and will usually fail when the car is in motion. While under the vehicle, inspect all of the connections along the drivetrain and keep an eye out for any parts that seems excessively worn. Bring a rag and wipe any mud or dust off to check for damage.

What are the common symptoms indicating you need to lubricate the driveshaft?

  • Clicking or grating sounds while the vehicle is in gear
  • Vibration in the vehicle while it is running

How important is this service?

This service is very important. Poor lubrication is one of the top reasons why driveshafts fail. When they do fail, driveshafts will fail while in motion and can take out more expensive parts around them. These preventative maintenance steps are extremely important in order to avoid more costs down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,558)

Rating Summary
5,170
189
54
28
117
5,170
189
54
28
117

Nicholas

11 years of experience
586 reviews
Nicholas
11 years of experience
Mercedes-Benz ML320 V6-3.2L - Lubricate Driveshaft - Durham, North Carolina
Very knowledgeable. Very professional.

Ben

41 years of experience
1416 reviews
Ben
41 years of experience
Mercedes-Benz SLK280 V6-3.0L - Fuel Pump - Crosby, Texas
Ben was very knowledgeable and professional. Answered my questions fully. I am very satisfied with this service.

Blake

13 years of experience
114 reviews
Blake
13 years of experience
Mercedes-Benz ML350 V6-3.5L - Car Battery Replacement - Raleigh, North Carolina
Great communication;

Franky

25 years of experience
21 reviews
Franky
25 years of experience
Mercedes-Benz CLK350 V6-3.5L - Oil Change - Brentwood, Tennessee
Frankie is promt, very knowledgeable and thorough.

Excellent Rating

(5,558)

Rating Summary
5,170
189
54
28
117
5,170
189
54
28
117
Number of Mercedes-Benz services completed
61138+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

What's the Difference Between Standard and Performance Air Filters?
Your Your air filter works to filter the air reaching the engine during combustion and protects it from dust, debris, dirt and bugs. From time to time, when the air filter gets clogged, you will need to replace or clean...
How Long Does an Air Pump Belt Last?
Most Most newer vehicles come with two air injections systems. The primary system delivers air through the air filter, and then to the intake, where it mixes with fuel in order to create combustion. The secondary system employs a pump...
10 Best GPS and Navigation Apps for Road Trips
Find your go-to road trip planner app or GPS device and start your next adventure.

Car shaking when slowing down.

A possible cause of this issue could be a warped brake rotor or a loose suspension part such as a control arm bushing. If your brake rotors are warped and the brakes are applied, this can send pulsation to your...

Why do I keep getting a P0101 code in my 2011 Nissan Sentra

Hello. If you are continuing to get the same code then the engine needs to be checked first for any vacuum leaks. The slightest leak in the intake tubes or any of the vacuum hoses or gaskets will cause this....

My infiniti g37 whines when I turn left. This is a problem that Infiniti knows about and suggests replacing with a new reservior . I believe its part number 49180-4M403\*. How much would that cost parts and labor

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com