Mercedes-Benz 350SDL Pitman Arm Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,716)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,716)

Pitman Arm Replacement Service

How much does a Pitman Arm Replacement cost?

On average, the cost for a Mercedes-Benz 350SDL Pitman Arm Replacement is $518 with $423 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Mercedes-Benz 350SDLL6-3.4L Turbo DieselService typePitman Arm ReplacementEstimate$960.31Shop/Dealer Price$1189.14 - $1836.26
1991 Mercedes-Benz 350SDLL6-3.4L Turbo DieselService typePitman Arm ReplacementEstimate$940.31Shop/Dealer Price$1169.17 - $1816.31
Show example Mercedes-Benz 350SDL Pitman Arm Replacement prices

What is the Pitman Arm all about?

Not the sexiest of all automotive parts, the Pitman Arm, named after railroad engineer George Pitman, is tasked with steering your car. The Pitman takes the circular motion generated by the sector shaft and converts it so that it can be used to turn the wheels. The Pitman arm, supported by the sector arm, is attached directly to the steering gearbox.

Keep in mind:

  • The Pitman Arm is robust. With proper maintenance, it will last the entire lifetime of your car.

How it's done:

  • The vehicle is raised, secured on jack stands and the front tire removed
  • The defective pitman arm is removed
  • The new pitman arm is installed with a new nut
  • The tire is installed and the vehicle is lowered off of the jack stands
  • The vehicle is road tested for proper steering operation

Our recommendation:

The Pitman Arm needs regular maintenance. If it receives that maintenance, it will easily last the life of your car. However, if you fail to give it regular maintenance, you will find that between 30,000 and 50,000 miles, your car's steering will falter. To prevent this, vehicle owners should have their Pitman Arm inspected regularly. A six-month inspection of the steering gear is more than adequate for most driving. However, if you drive in rough, rocky, off-road or other harsh conditions, the Pitman Arm will deteriorate quickly. It is wise to have it inspected, and replaced, if need be, on a three-month basis if this is the case. This may seem drastic, but remember that if your car's front wheels are taking a pounding, the Pitman Arm, as it sits on the steering gearbox, does too.

What common symptoms indicate you may need to replace the Pitman Arm?

  • Excessive play in the steering
  • Irregular or slipping steering
  • Inexact steering or wandering

How important is this service?

If you fail to follow the service recommendations in your owner's manual, you run the very real risk of losing steering control due to Pitman Arm failure. When the Pitman Arm fails, there is no longer a connection between the sector shaft and the wheels. When that direct connection is lost, you lose the ability to steer, which can result in dangerous consequences.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,716)

Rating Summary
5,320
192
54
29
121
5,320
192
54
29
121

John

27 years of experience
1053 reviews
John
27 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Oil Change - Pearland, Texas
Excellent mechanic and very knowledgeable. I’d recommend to anyone looking for a trustworthy individual

Chet

41 years of experience
495 reviews
Chet
41 years of experience
Mercedes-Benz C63 AMG S V8-4.0L Turbo - Oil Change - San Diego, California
Not on time and oil drips on my street...

Jason

15 years of experience
344 reviews
Jason
15 years of experience
Mercedes-Benz C300 V6-3.5L - Pre-purchase Car Inspection - Plainview, New York
Jason was kind, straight forwards and very knowledgeable. I would definitely use him again.

Tony

15 years of experience
36 reviews
Tony
15 years of experience
Mercedes-Benz 300E L6-3.2L - Alternator - Saint Louis, Missouri
Tony's a life saver!!!

Excellent Rating

(5,716)

Rating Summary
5,320
192
54
29
121
5,320
192
54
29
121
Number of Mercedes-Benz services completed
62876+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

What Is the Difference Between a Water-Cooled Engine and an Air-Cooled Engine?
There There are a few main differences between a water-cooled and air-cooled engine. Air-cooled engines utilize an engine cylinder design that incorporates cooling fins all the way around the cylinder and on top of the piston cylinder head. These fins...
How Long Does a Coolant Reservoir Last?
The coolant reservoir is a tank located in your vehicle that holds the overflowing coolant that comes from your cooling system. The reservoir...
B1974 OBD-II Trouble Code: Passenger’s Seat Recline Forward Switch Circuit Short to Battery
B1974 means there is an issue with the recline forward seat button on the passenger side, likely due to damaged electrical components in the system.

Engine reduce power and light goes off but not other warning lights

Hello, thank you for writing in. When you have any type of warning light it means the computer has detected an issues when it was running tests. The computer is constantly running tests, and even stores some of their codes...

code reader -engine coolant flow low/performance

Hello. The trouble codes you have listed do not appear to be in the typical format for automotive trouble codes. Trouble codes are listed with a letter P followed by four digits. If your EPC light is on that indicates...

Changing tailight/brake light double filament bulb on 08 sienna. Bulb is stuck in socket. Bad. Can't pull it out. Any ideas?

If the bulbs are stuck in the sockets then the sockets most likely got overheated from the bulbs and deformed the socket. You will need to replace the sockets and the bulbs.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com