Mercedes-Benz 300E Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(16)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(16)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a Mercedes-Benz 300E Car shuts off when stepping on gas pedal Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Mercedes-Benz 300EL6-3.0LService typeCar shuts off when stepping on gas pedal InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1992 Mercedes-Benz 300EL6-3.0LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1991 Mercedes-Benz 300EL6-2.6LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1990 Mercedes-Benz 300EL6-2.6LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
1987 Mercedes-Benz 300EL6-3.0LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
1986 Mercedes-Benz 300EL6-3.0LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1991 Mercedes-Benz 300EL6-3.0LService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
1988 Mercedes-Benz 300EL6-3.0LService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Mercedes-Benz 300E Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(16)

Rating Summary
14
1
0
0
1
14
1
0
0
1

James

12 years of experience
233 reviews
James
12 years of experience
Mercedes-Benz 300E L6-3.2L - Battery - San Francisco, California
Was given a "fixed price" for two services, one was completed but the other was not because the price for egr valve jumped significantly. In conversations with company reps I was not satisfied with their explanation of "fixed price" being only in regards to service charge as the website does not state that, it stated that there will be "no surprises, fixed price for services requested..." I feel there was false advertising. the battery was installed as part two of the service before being informed of the price hike so I wound up paying for that and not getting the main service completed. had the higher price been given initially I would not have booked the service at all.

Paul

23 years of experience
302 reviews
Paul
23 years of experience
Mercedes-Benz 300E L6-3.0L - Ignition Coil - Tampa, Florida
Paul was very competent, and went out of his way to get my mom's car running again.

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
Mercedes-Benz 300E L6-2.6L - Oil Change - Daly City, California
Grzegorz Kilon arrived 35 minutes late. When he arrived, he did not have the filter. He came back 10:35 AM from the supposedly 9 AM appointment. Would have avoided the delay if he had it in the beginning. Also, PENZOIL was indicated that was used in receipt. He used an O'Reilly brand oil.

George

33 years of experience
7 reviews
George
33 years of experience
Mercedes-Benz 300E L6-2.8L - Spark Plugs - Jacksonville, Florida
Mr Decker did a great job!

Excellent Rating

(16)

Rating Summary
14
1
0
0
1
14
1
0
0
1
Number of Mercedes-Benz 300E services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Kansas Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Kansas. Speed limits in Kansas 75 mph: rural freeways and interstates 70 mph: other interstates and divided roads...
P2263 OBD-II Trouble Code: Turbo/Supercharger Boost System Performance
Diagnostic Diagnostic Trouble Code (DTC): P2263 P2263 code definition Turbo/Supercharger Boost System Performance Related Trouble Codes: P0039: Turbo/Supercharger Bypass Valve Ctrl Circ Range/Perf...
How to Replace a Water Pump Pulley
The serpentine belt or drive belt drives an engine’s water pump pulley, which rotates the water pump. A bad pulley leads to a failure of this system.

Car is showing random misfire code po300

The only sensor that will cause the RPM gauge to read incorrectly and cause a rough running engine is the crankshaft position sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor), or its wiring and connector. Try and disconnect the crankshaft sensor connector located above the oil...

Lights on dash are malfunctioning and sensors like airbags are tripped.

Unless the incident which knocked your mirror off was also the "pothole from hell", there is not likely a connection. You don't mention what year or model for your GMC, but GM supplied a digital dash for late model GMC...

Over Heat drive long distances hot drives good when driving long distance when it cold outside

Overheating can be caused by a number of things such as low coolant levels, a faulty thermostat (https://www.yourmechanic.com/services/thermostat-replacement), a clogged radiator (https://www.yourmechanic.com/services/radiator-replacement) or a failing coolant fan switch. As you may know the coolant fan switch (https://www.yourmechanic.com/services/cooling-fan-relay-replacement) helps to maintain...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com