Mazda MX-6 Brake fluid is black or brown Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(17)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(17)

Brake fluid is black or brown Inspection Service

How much does a Brake fluid is black or brown Inspection cost?

On average, the cost for a Mazda MX-6 Brake fluid is black or brown Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mazda MX-6L4-2.2LService typeBrake fluid is black or brown InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1989 Mazda MX-6L4-2.2L TurboService typeBrake fluid is black or brown InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Mazda MX-6L4-2.2L TurboService typeBrake fluid is black or brown InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 Mazda MX-6L4-2.2L TurboService typeBrake fluid is black or brown InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1994 Mazda MX-6V6-2.5LService typeBrake fluid is black or brown InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1996 Mazda MX-6V6-2.5LService typeBrake fluid is black or brown InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Mazda MX-6V6-2.5LService typeBrake fluid is black or brown InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1997 Mazda MX-6L4-2.0LService typeBrake fluid is black or brown InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mazda MX-6 Brake fluid is black or brown Inspection prices

Your car requires several different fluids in order to operate. Engine oil, transmission fluid, power steering fluid and coolant are all essential. Another important one is brake fluid. Like other fluids, your brake fluid will deteriorate over time and eventually need to be replaced with a brake system flush. If you’ve noticed that your brake fluid appears black or brown, it’s well past time for a service.

How this system works:

Your brakes are operated by fluid pressure. The master cylinder and brake booster work to create pressure, which is then directed to the moving parts of the system (the calipers and shoe actuators). In a normal system, the brake fluid is clear or very light gold in color. This is true whether your car requires DOT 3, 4 or 5 brake fluid.

Brake fluid is held in the master cylinder reservoir, but it is also stored in the brake lines that run from the master cylinder to each wheel. You have two types of brake lines – steel and rubber. Over time and through normal use, brake fluid becomes contaminated. This happens on all vehicles, even brand new ones.

It requires only a couple of years for the fluid to build up enough contaminants that the color begins to change. It will darken over time, changing from clear/golden to a darker gold. In severe situations, your brake fluid may appear to be brown, or even black (think used engine oil).

It’s important that your brake fluid is changed regularly, before it turns brown or black. Very dark colors indicate that your fluid has collected a significant amount of contamination, and might have absorbed moisture, as well. This reduces the system’s ability to build pressure, which compromises your braking performance. You may have noticed that your brake pedal feels softer, or spongy. In serious situations, you may have to pump the pedal a couple of times for it to work properly.

Common reasons for this to happen:

  • Normal Aging Gone to the Extreme: The most common reason that brake fluid appears brown or black is that normal aging has gone unchecked (you haven’t had the fluid changed in too long). Contaminants collect in the fluid, darkening the color and reducing its ability to work.

  • Moisture Contamination: Brake fluid can absorb moisture from the surrounding air. This generally occurs by rubber brake lines allowing moisture to seep in. When moisture accumulates in brake fluid, it causes problems in a couple of ways. Water has a much lower boiling point than brake fluid, and can reach very high temperatures at the calipers and drums. This causes the water to flash boil into steam, causing the brake fluid to darken, but also creating air in the lines. This can cause a soft pedal, or even cause you to have to pump the brake pedal to get the system to work properly.

  • Deteriorating Rubber Lines: The rubber brake lines on your car will eventually deteriorate and need to be replaced. Brake fluid is also corrosive, and while the lines are designed to withstand that corrosion, they’ll eventually begin to break down. Microscopic pieces of rubber and chemicals leaching out of the lines into the fluid will also cause it to darken.

  • Normal Heating: Brake fluid is heated by contact with the calipers, and this heat creates a chemical change in the fluid, adding to the darkening created by moisture and other types of contamination.

What to expect:

A top-rated mobile mechanic will come to your home or office and visually inspect your brake fluid’s condition, the master cylinder and the rest of the system to determine if the problem is simply due to normal age and wear/tear. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect the master cylinder, lines and other brake system components. The mechanic will also determine how long it has been since your brake fluid was last changed, and may need to perform a brake fluid flush to remove the contaminated, old fluid and replace it with fresh, clean fluid.

How important is this service?

Brake fluid darkens as it ages – it’s natural, and due to normal contamination that occurs in all brake systems. However, it must be changed regularly, or you risk reduced braking performance and the deterioration or damage of other brake system components. One of our professional mechanics can inspect your system, change your fluid, and ensure that you enjoy the safety you deserve on the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(17)

Rating Summary
14
0
2
1
0
14
0
2
1
0

Robert

20 years of experience
1115 reviews
Robert
20 years of experience
Mazda MX-6 V6-2.5L - 75 Point Safety Inspection - Louisville, Colorado
Very nice guy, accommodating since I live in Boulder and the system wouldn't match me up with anyone there. Since I don't have an address in Louisville where he works, he found a location for me where we can meet. Also honest about the work that he does. Can only recommend.

Harish

27 years of experience
588 reviews
Harish
27 years of experience
Mazda MX-6 L4-2.2L - Clutch is not working - Charlotte, North Carolina
Will definitely use again in the future

Jason

17 years of experience
429 reviews
Jason
17 years of experience
Mazda MX-6 V6-2.5L - Pre-purchase Car Inspection - Fremont, California

Robert

32 years of experience
191 reviews
Robert
32 years of experience
Mazda MX-6 V6-2.5L - Robert Panaggio came to our house last week and did some diagnostics on our car and found our problem. Unfortunately, the problem went a little further than any of us thought, and we would like Robert to come back and disconnect the Pro Lock system in the car, since that is the problem, and we really don't need it anymore. - Cupertino, California
Again, excellent service, and our problem was solved quickly and efficiently.

Excellent Rating

(17)

Rating Summary
14
0
2
1
0
14
0
2
1
0
Number of Mazda MX-6 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

The Traveler’s Guide to Driving in Argentina
It is safe to drive in Argentina if travelers drive defensively in their rental car. Road signs are in Spanish but have similar shapes to US signs.
How to Check Spark Plug Wires
Car engines that have a distributor or remote coil pack have spark plug wires that transfer the spark from the coil to the spark plug.
P0793 OBD-II Trouble Code: Intermediate Shaft Speed Sensor Circuit No signal
P0793 code means the transmission fails to provide a proper shift strategy due to faulty sensors, shift solenoids, or faulty wiring.

Where are the front cup holders?

The front cup holders are located next to the shift lever.

The mechanics is saying to change the Brake pads and engine mount replacement cost $550. is this worth to repair the car or sell

You have an "older" car but one with relatively low mileage on the engine. (My car is 26 years old, so don't feel bad). The big issue with "older" cars is corrosion and deterioration of critical rubber products like valve...

P0011 engine light came on and went off a couple days later. Should I still go to shop and get it checked?

A P0011 (https://www.yourmechanic.com/article/p0011-obd-ii-trouble-code-camshaft-position-a-timing-over-advanced-or-system-performance-bank-1-by-jay-safford) code indicates that the intake camshaft is consistently running more advanced timing than the engine computer has commanded. Usually, you should also notice a rough-running condition, poor fuel economy, emissions problems, hard starting and hesitation along with...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com