Mazda B2600 Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(7)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(7)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Mazda B2600 Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Mazda B2600L4-2.6LService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 Mazda B2600L4-2.6LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1993 Mazda B2600L4-2.6LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 Mazda B2600L4-2.6LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1987 Mazda B2600L4-2.6LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1988 Mazda B2600L4-2.6LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 Mazda B2600L4-2.6LService typeOil level is low InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
Show example Mazda B2600 Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Mazda B2600 L4-2.6L - Thermostat - San Juan Capistrano, California
Chris has his game on !

David

12 years of experience
2 reviews
David
12 years of experience
Mazda B2600 L4-2.6L - Car is not starting - Riverside, California
he was very helpful even walked 2 orielys with me

Jay

37 years of experience
947 reviews
Jay
37 years of experience
Mazda B2600 L4-2.6L - Inspection / Diagnostics - Riverside, California
Jay was very professional and personable and he explained things in terms that were easy to understand. I highly recommend him

Gregory

11 years of experience
27 reviews
Gregory
11 years of experience
Mazda B2600 L4-2.6L - Car is not starting - Fresno, California
Good communication, thorough check of the vehicle, left the vehicle in better shape than he found it outside of the reason for the call (replaced an old nasty bolt, filled tires with air, etc.), and was even nice to my dog.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Mazda B2600 services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Power Steering Control Unit Last?
Most Most cars on the road today (and in the past) use a hydraulic power steering system. A pump sends power steering fluid through a series of lines to the power steering rack, which augments your ability to turn the...
P2723 OBD-II Trouble Code: Clutch Pressure Control Solenoid 5 - Stuck Off
P2723 means a solenoid has malfunctioned due to low fluid levels, a failing transmission, faulty sensor or solenoid, or electrical issues or problems.
The Guide To Colored Curb Zones in Massachusetts
###Massachusetts ###Massachusetts parking laws: understanding the basics The parking laws in Massachusetts are developed by the state and then enforced by the cities and the towns. As such, this means that the cost of the fines for parking violations can...

What is the SecuriLock® system on my car?

Your car is equipped with both a security system and an immobilizer system. The SecuriLock® system is the immobilizer. It’s actually the only anti-theft system onboard the car – the alarm only sounds the horn and flashes the lights. It...

Car accelerating on its own

Hi. The first thing I would look towards is a problematic accelerator cable. I would recommend checking the accelerator cable for defects, kinks, and miss adjustments. If that is found to be the problem, have the accelerator cable replaced (https://www.yourmechanic.com/services/accelerator-cable-replacement)...

Does my car need a clutch replacement?

Hi there. It sounds like the clutch is slipping; similar to when an automatic transmission slips. The clutch disc provides the friction surface that allows the transfer of engine torque to the transmission. It accomplishes this by riding on the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com