Mazda B2500 Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(21)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(21)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Mazda B2500 Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Mazda B2500L4-2.5LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1999 Mazda B2500L4-2.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 Mazda B2500L4-2.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2000 Mazda B2500L4-2.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Mazda B2500 Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0

Christopher

12 years of experience
142 reviews
Christopher
12 years of experience
Mazda B2500 L4-2.5L - Car is not starting - Charlotte, North Carolina
10

Alex

15 years of experience
89 reviews
Alex
15 years of experience
Mazda B2500 L4-2.5L - Oil Change - Round Rock, Texas
Great job by Alex and easy experience. Very convenient. He was quick, in time and communicated with.me about my car. Much better than the repair shop.

Matthew

33 years of experience
1222 reviews
Matthew
33 years of experience
Mazda B2500 L4-2.5L - Power Steering Fluid Service - Newport News, Virginia
Great service! My mechanic did a great job & he was very knowledgeable. I would absolutely use your services again & recommend to my friends & family.

Patrick

33 years of experience
1412 reviews
Patrick
33 years of experience
Mazda B2500 L4-2.5L - Timing Belt - Austin, Texas

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0
Number of Mazda B2500 services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

P0546 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 1
P0546 code means that the malfunction is related to the exhaust gas temperature sensor circuit due to loose terminals, wiring issues, or faulty sensor
How Much Does a Mechanic Make in South Carolina?
Automotive technician jobs in South Carolina have an mean salary of $36k, with some mechanics earning as much as $57k.
P0631 OBD-II Trouble Code: VIN Not Programmed or Incompatible – TCM
P0631 means the transmission control module failed to recognize the VIN, often due to a damaged PCM or module-related wiring.

Battery not charging and car unable to start

The problem you are having sounds like a starter assembly failing, but this usually causes a click from the relay (https://www.yourmechanic.com/services/starter-relay-replacement) or the starter assembly (https://www.yourmechanic.com/services/starter-replacement) which is fastened to the engine. I recommend having a local expert, like one...

When I turn off the car, power steering fluid over-flows from under the reservoir cap. 1999 Infiniti Q45

Hello - it sound like your power steering system has been over-filled with fluid, perhaps the wrong fluid (https://www.yourmechanic.com/article/how-to-buy-good-quality-power-steering-fluid) was used (non-synthetic) and is foaming, or the fluid filter (in the reservoir) is clogged. I recommend a PS fluid service...

2012 Mazda 3 vibration

A number of components can cause a vibration. An engine misfire (https://www.yourmechanic.com/services/engine-is-misfiring-inspection) can cause a bad vibration but odds are that if misfiring was the cause, you would have low power and a check engine light flashing. Vibrations at speed...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com