Lincoln MKC Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(21)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(21)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Lincoln MKC Brake Master Cylinder Replacement is $300 with $118 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Lincoln MKCL4-2.3L TurboService typeBrake Master Cylinder ReplacementEstimate$437.16Shop/Dealer Price$500.76 - $681.01
2015 Lincoln MKCL4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$425.45Shop/Dealer Price$488.53 - $668.41
2016 Lincoln MKCL4-2.3L TurboService typeBrake Master Cylinder ReplacementEstimate$425.45Shop/Dealer Price$488.59 - $668.51
2015 Lincoln MKCL4-2.3L TurboService typeBrake Master Cylinder ReplacementEstimate$425.45Shop/Dealer Price$488.59 - $668.50
2018 Lincoln MKCL4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$425.45Shop/Dealer Price$488.69 - $668.69
2017 Lincoln MKCL4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$425.45Shop/Dealer Price$486.96 - $665.65
2016 Lincoln MKCL4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$425.45Shop/Dealer Price$488.62 - $668.57
2017 Lincoln MKCL4-2.3L TurboService typeBrake Master Cylinder ReplacementEstimate$425.45Shop/Dealer Price$486.78 - $665.33
Show example Lincoln MKC Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(21)

Rating Summary
21
0
0
0
0
21
0
0
0
0

Matthew

4 years of experience
2 reviews
Matthew
4 years of experience
Lincoln MKC L4-2.0L Turbo - Oil Change - Cleveland, Ohio
Matt was professional and friendly and knew exactly what he was doing. I highly recommend him

Adam

18 years of experience
263 reviews
Adam
18 years of experience
Lincoln MKC L4-2.0L Turbo - Spark Plugs - Boca Raton, Florida
Adam is truly an awesome mechanic. He is thorough and knowledgeable while providing first-class service.

John

33 years of experience
1126 reviews
John
33 years of experience
Lincoln MKC L4-2.0L Turbo - Car Battery Replacement - League City, Texas
Knew his stuff! Friendly, just an all around great guy. Explained what he was doing, no problems. Would highly recommend him!

Tavon

25 years of experience
1 reviews
Tavon
25 years of experience
Lincoln MKC L4-2.0L Turbo - Spark Plugs - Baltimore, Maryland
Tavon was really nice, took the time to explain what was what, and he was quick!! Now all my car needs is a bath. Thanks Tavon!

Excellent Rating

(21)

Rating Summary
21
0
0
0
0
21
0
0
0
0
Number of Lincoln MKC services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Idle Control Valve
Common signs include irregular or unusually high idle speed, the Check Engine Light coming on, and stalling while idling.
The Best Used Cars to Buy If Safety is #1
Maybe Maybe you’re a parent buying the first car for your teenager, or perhaps you’re a new parent and the safety of your little one is of the utmost importance. Or perhaps you're a safety-minded individual looking to make a...
How to React After Witnessing an Accident
A A hit-and-run accident is always a difficult situation for the victim whose person, vehicle, or property was involved. A hit-and-run is particularly difficult to deal with in situations where no one is around to witness the accident and help...

Mixing red and green coolant in the radiator

Realize that green antifreeze is the old style antifreeze. That was an old type of antifreeze where the glycol lasts maybe three years max. So you've got to change the coolant maybe three years or every 15,000 miles. The modern...

Cabin fan inop - no heat or A/C

While you have it turned on, try wiggling the wires to the resistor and blower motor to see if you have a poor wire connection. If it still will not come on again, then you may have burned out the...

I installed a new radio yesterday and now my car won't start.

Hi there. The black wire behind the dash is your ground wire, which should have been connected to a bolt or screw that contacts the bare metal of the car's chassis. If this is not connected, the stereo will not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com