Lexus LS400 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(130)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(130)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Lexus LS400 Brake Pad Replacement is $221 with $81 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Lexus LS400V8-4.0LService typeBrake Pads - Front ReplacementEstimate$758.18Shop/Dealer Price$905.54 - $1329.19
1996 Lexus LS400V8-4.0LService typeBrake Pads - Rear ReplacementEstimate$554.83Shop/Dealer Price$646.93 - $913.13
1994 Lexus LS400V8-4.0LService typeBrake Pads - Front ReplacementEstimate$725.41Shop/Dealer Price$873.52 - $1310.52
1999 Lexus LS400V8-4.0LService typeBrake Pads - Rear ReplacementEstimate$554.83Shop/Dealer Price$646.99 - $913.23
1995 Lexus LS400V8-4.0LService typeBrake Pads - Front ReplacementEstimate$746.47Shop/Dealer Price$893.22 - $1316.41
1998 Lexus LS400V8-4.0LService typeBrake Pads - Front ReplacementEstimate$746.47Shop/Dealer Price$890.18 - $1311.10
1991 Lexus LS400V8-4.0LService typeBrake Pads - Rear ReplacementEstimate$360.89Shop/Dealer Price$417.89 - $581.53
2000 Lexus LS400V8-4.0LService typeBrake Pads - Rear ReplacementEstimate$554.83Shop/Dealer Price$646.99 - $913.23
Show example Lexus LS400 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(130)

Rating Summary
121
7
1
0
1
121
7
1
0
1

Michael

0 years of experience
243 reviews
Michael
0 years of experience
LS400 1991 - Car is not starting - Las Vegas, NV
Extremely Knowledgeable in the generation of my vehicle (1991 LS400), ON-Time and prepared! He got straight to work and also explained each step without me asking what he was doing, I really appreciated that because the previous Mechanic RAYMOND that was sent by YourMechanic.com did not perform many of the tasks for the Inspection of my vehicle as I clearly saw MICHAEL MILLER Complete.

Andrew

12 years of experience
83 reviews
Andrew
12 years of experience
LS400 1991 - Brakes, Steering and Suspension Inspection - Puyallup, WA
Andrew explained issues he was seeing and did a full inspection of my vehicle.

Michael

35 years of experience
131 reviews
Michael
35 years of experience
LS400 1997 - Cruise control is not working - Los Alamitos, CA
Thanks

Peter

36 years of experience
1542 reviews
Peter
36 years of experience
LS400 1998 - Positive Crankcase Ventilation (PCV) Valve - Chandler, AZ
Peter has worked on my Lexus LS 6 times. I have one appoInment coming up and the wait to book Peter was 2 weeks. He is simply the best. Like the Mercedes commercial says: the best or nothing. Not only is Peter the best, he is also extremely nice, personable and willing to share his knowledge. A rare find indeed!

Excellent Rating

(130)

Rating Summary
121
7
1
0
1
121
7
1
0
1
Number of Lexus LS400 services completed
1430+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

The Guide To Colored Curb Zones in Nebraska
Nebraska Nebraska parking laws: understanding the basics Even though you are well acquainted with all of the rules of the road and you are safe and abide by the law when driving, you need to make sure you take the...
Symptoms of a Bad or Failing Emergency / Parking Brake Shoe
If your parking brake does not properly hold the vehicle or does not function at all, you may need to replace a parking brake shoe.
A Guide to Rideshare Insurance
As a rideshare driver, you need special insurance to cover what rideshare companies don’t. Here’s how to purchase it and file a claim.

How do the front air bags work?

The front air bags in your car are designed to provide important protection in the event of certain types of collision. Here’s what you need to know about them: Multiple Thresholds: Once, air bags only inflated. However, yours have multiple...

What would stop the ignition lock cylinder from going back in its casing?

Unfortunately, without physically seeing the ignition cylinder in person, it would be difficult to determine why it is unable to go back in. One thing you can attempt to do is to take your Dodge's ignition cylinder to a locksmith...

Whining from transmission to rear end area 2007 Chevrolet Silverado 1500

Hello - your intuition is correct. The ring and pinion gear are severely worn (https://www.yourmechanic.com/question/rear-differential-humming), and will need to be replaced (w/all new ring and pinion bearings) to eliminate the "noise under load" you notice. Setting up a ring &...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com