Land Rover LR3 Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(114)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(114)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Land Rover LR3 Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Land Rover LR3V8-4.4LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2008 Land Rover LR3V6-4.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2005 Land Rover LR3V6-4.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2008 Land Rover LR3V8-4.4LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2005 Land Rover LR3V8-4.4LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2006 Land Rover LR3V6-4.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2009 Land Rover LR3V6-4.0LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2009 Land Rover LR3V8-4.4LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Land Rover LR3 Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(114)

Rating Summary
108
3
1
0
2
108
3
1
0
2

Ben

41 years of experience
1436 reviews
Ben
41 years of experience
Land Rover LR3 V8-4.4L - Car is overheating - Houston, Texas
Love the passion he has for is work.

Michael

40 years of experience
131 reviews
Michael
40 years of experience
Land Rover LR3 V8-4.4L - Oil Change - Columbus, Ohio
Michael showed up right on time, was done in an hour, and had some good recommendations for me. 5 stars all the way.

Behrak

9 years of experience
332 reviews
Behrak
9 years of experience
Land Rover LR3 V6-4.0L - Spark Plugs - Lawrenceville, Georgia
Awesome. Would definitely recommend

TJ

26 years of experience
362 reviews
TJ
26 years of experience
Land Rover LR3 V8-4.4L - Spark Plugs - Sarasota, Florida
Once again TJ does an amazing job and explains all he finds in detail.

Excellent Rating

(114)

Rating Summary
108
3
1
0
2
108
3
1
0
2
Number of Land Rover LR3 services completed
1254+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
500+
experts on our platform

Recent articles & questions

Oregon Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Oregon. Speed limits in Oregon Oregon has one of the highest maximum speed limits in the United States,...
P0785 OBD-II Trouble Code: Shift/Timing Solenoid Malfunction/ 3-2 Shift Solenoid Circuit Electrical
P0785 means there was an abnormality detected in the shift/time solenoid often due too a faulty shift solenoid or failures in the transmission.
What to Look For in a Performance Driving School
Performance driving schools teach driving techniques used by race car drivers, such as braking before turns and preventing fishtailing.

Rear liftgate wont close

I would recommend trying to use the unlock switch on your keyfob or door panel. If this does not work, I would recommend inserting your key into the liftgate and turn it to the unlock position. If this does not...

over current resetting does not reset

Hi there. Unfortunately, we need quite a bit more information from you, including what year, make and model of vehicle you're talking about, and what symptoms you're experiencing with the vehicle. YourMechanic.com offers basic automotive repair and service recommendations. Thanks....

code 340 sensor camshaft

Hi there. If the error code they gave you was P-0340, this indicates that the problem is with the camshaft position sensor. The camshaft position sensor calculates the rotational speed of the camshaft and where the camshaft is positioned in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com