Land Rover Freelander Engine oil is black and gritty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(11)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(11)

Engine oil is black and gritty Inspection Service

How much does a Engine oil is black and gritty Inspection cost?

On average, the cost for a Land Rover Freelander Engine oil is black and gritty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Land Rover FreelanderV6-2.5LService typeEngine oil is black and gritty InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2003 Land Rover FreelanderV6-2.5LService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2004 Land Rover FreelanderV6-2.5LService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2005 Land Rover FreelanderV6-2.5LService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
Show example Land Rover Freelander Engine oil is black and gritty Inspection prices

Car engines need oil to operate smoothly and efficiently. Engine oil helps lubricate the dozens of moving and interacting parts, helps prevent rust and corrosion as well as aiding in removing the heat that an engine generates. Modern oil also helps keep an engine clean by removing sludge and build-up. An engine without oil simply will not function.

Brand new engine oil is a lovely amber color but over time it will turn black and in some cases will get gritty. Fortunately, this is usually not a problem, it is simply a result of the oil doing the job it was designed to do.

How this system works:

The primary function of engine oil is to lubricate the various moving parts of an engine. The constant contact between these moving parts generates both heat and wear and tear. Engine oil keeps friction to a minimum and dissipates the heat.

Engine oil is stored in the oil pan. The pan holds between 4 and 6 quarts of oil. When an engine is started, an oil pump sucks the oil from the pan through the pickup tube. The oil then travels to the oil filter, which removes any dirt and debris that has accumulated in it and then sends the oil into the engine via spurt holes. The oil moves through the engine and eventually makes it way back to the oil pan where the process starts again.

Common reasons for this to happen:

  • Normal Wear and Tear: Regardless of how often oil is changed, eventually it becomes black and slightly gritty. This simply means it is doing its job. Modern detergent engine oils which have detergent additives are designed to disperse the tiny particles or engine sludge and hold them in suspension in the oil so they do not build up on engine parts.

This will make the oil darker in color, and slightly gritty but it’s better for the build up to be trapped in the oil then building up on the vehicles engine parts. Oil can only hold so much sludge and eventually it will need to be replaced.

  • Dirty Oil Filter: An oil filter’s primary function is to filter out contaminants in the oil that it picks up while cycling through the engine. Over time an oil filter will become full and will need to be replaced. If it is unable to filter the oil the contaminants will remain in the oil and possibly damage the engine.

  • Overdue for an Oil Change: Oil needs to be changed on a regular basis. While oil turning black and getting slightly gritty is normal, extremely black oil that develops globs on the dipstick needs to be changed immediately. The interval between oil changes will vary depending on the type of oil being used but it is a good idea to follow the manufacturers recommendations.

While 3,000 miles used to be the recommendation, most modern oils, especially synthetics can go between 7,000-10,000 before an oil change is needed.

  • Oil Light Comes On: In most vehicles, if the Oil Warning light comes on, it is reason for immediate concern. In most cases this will indicate a low oil pressure situation, which could be the result of a failing oil pump or a leak. This can do severe damage to the engine. The vehicle should be inspected and repaired immediately.

  • Oil Level is Dropping: If the vehicle is consistently low on oil or the level is dropping sharply over a short period of time, there is probably an oil leak somewhere in the system. An oil leak can lead to a dangerously low amount of oil in the car and should be repaired immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Oil is Black and Gritty issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic look for normal wear and tear of the engine oil, along with the oil filter, oil level and other indications that will help determine if any problem exists or if additional procedures are required in order to provide you with an accurate diagnosis.

How important is this service?

In most cases black and gritty engine oil is normal. Engine oil should be changed on a regular basis according to the manufacturers recommendations. Going too long between oil changes can affect the performance of the engine and lead to expensive repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(11)

Rating Summary
9
2
0
0
0
9
2
0
0
0

Darin

20 years of experience
3 reviews
Darin
20 years of experience
Land Rover Freelander V6-2.5L - Oil Change - Hayward, California
Darin was very friendly and professional. He was very neat and tidy with his equipment and supplies, and he left my car neatly. I will definitely request Darin again. Thank you!!!

Michael

37 years of experience
39 reviews
Michael
37 years of experience
Land Rover Freelander V6-2.5L - Radiator Hose Repair - Hayward, California
Michael was very punctual and professional. He worked very efficiently with my car, which is not an easy thing to do. He was very knowledgeable with getting my car done on time. With owning a freelander, most mechanics would not touch my car, but Michael tackled the job without any hesitation. Thank you for a great job.

Robert

17 years of experience
71 reviews
Robert
17 years of experience
Land Rover Freelander V6-2.5L - Crankshaft Position Sensor - Duluth, Georgia
excellent

Ralph

38 years of experience
187 reviews
Ralph
38 years of experience
Land Rover Freelander V6-2.5L - Car is not starting - Lakewood, Washington
He is really kind person. Thanks.

Excellent Rating

(11)

Rating Summary
9
2
0
0
0
9
2
0
0
0
Number of Land Rover Freelander services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
500+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Washington
When When driving in the state of Washington, there are bound to be any number of times when you will have to stop or slow down to allow another vehicle or a pedestrian to proceed. Even in the absence of...
How to Replace an Air Pump Check Valve
The air pump check valve allows air into the exhaust system. It also prevents exhaust gases from reentering the system during a backfire or failure.
How to Troubleshoot a Power Moon Roof That Won't Open
Car moon roofs won't open if the tracks are clogged or the cables, electric motor, or moon roof switch is broken.

Car overheating and not starting.

If the engine has been overheating and got hot enough then you may have caused some serious engine damage causing the engine to no longer start. If it did not get too hot then these may be separate issues. When...

spark plug wires

It all depends on the vehicle and engine you have. The use of 45 degree angle wire boots is so the boot does not tough or get near the exhaust manifold. The 180 degree wire boots may get the wire...

How do I remove/replace the driveshaft center support bearing from the shaft?

Hey there. In order to replace the center support bearing you will need to remove the rear drive shaft and then drop the center support bearing and front shaft. The support bearing will need to be pressed off and then...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com