Jeep Patriot Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(498)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(498)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Jeep Patriot Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Jeep PatriotL4-2.4LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2015 Jeep PatriotL4-2.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Jeep PatriotL4-2.4LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2013 Jeep PatriotL4-2.4LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2015 Jeep PatriotL4-2.4LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2017 Jeep PatriotL4-2.4LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Jeep PatriotL4-2.0LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2007 Jeep PatriotL4-2.4LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Jeep Patriot Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(498)

Rating Summary
474
10
4
0
10
474
10
4
0
10

Chris

16 years of experience
329 reviews
Chris
16 years of experience
Jeep Patriot L4-2.0L - Battery - San Diego, California
very easy to coordinate with

Jeremy

20 years of experience
603 reviews
Jeremy
20 years of experience
Jeep Patriot L4-2.4L - Serpentine/Drive Belt - Lake Worth, Florida
Awesome gentleman. great work and service, Quick and efficient

Shay

28 years of experience
137 reviews
Shay
28 years of experience
Jeep Patriot L4-2.0L - Brake Pads Replacement (Front) - Houston, Texas
He came back the next day to finish some work on my car and he was so fast, but extremely thorough. Great mechanic.

Ronald

41 years of experience
313 reviews
Ronald
41 years of experience
Jeep Patriot L4-2.4L - Turn signal light is not working - Spring, Texas
Great service. Very informative and friendly. Will use again.

Excellent Rating

(498)

Rating Summary
474
10
4
0
10
474
10
4
0
10
Number of Jeep Patriot services completed
5478+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

Is It Okay to Drive a Vehicle With Windows that Won’t Roll Up or Down?
When When you drive, you need to roll down your window for many different reasons. You might need to: Speak with a peace officer at a traffic stop Order at a drive-thru window Open the window for air flow Open...
P0744 OBD-II Trouble Code: Torque Converter Clutch Circuit Intermittent
P0744 code means there is an abnormality in the torque converter clutch circuit often due to transmission failure or internal blockages.
C1103 OBD-II Trouble Code: ABS Hydraulic Brake Switch Circuit Failure
Trouble code C1103 means the ECU has detected an unspecified failure in the hydraulic brake switch circuit of the ABS.

Check Engine code P0351

Hi there. This code is set when the PCM detects a fault in ignition coil #1. There are 6 coils in your vehicle. The problem may be the coil itself or it may be a wiring issue. Diagnostic information along...

Car stalls at low speed

Your idle air control valve can be stuck closed and not raising the idle to keep it from stalling when coming to a stop. Also if you have an engine vacuum leak it can also cause this problem. You did...

Key fob is stuck in the ignition and car won't start

The battery may be dead and if so the key is stuck because there is no power to the safety interlock. If you want the required diagnostic steps performed by a certified Mechanic, dispatched by YourMechanic (https://www.yourmechanic.com) right to your...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com