Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.
How A Diagnostic Works
Instantly book a certified mobile mechanic to come to you
Mechanic diagnoses the problem and quotes necessary repairs
Your vehicle is ready to go
Fair, upfront & transparent pricing for all services
Our certified mobile mechanics can come to you now.
On average, the cost for a Jeep Liberty Valve cover gasket is leaking Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.
Typically made from rubber or cork, a valve cover gasket helps seal the gap between the valve cover and the top of the engine. When this gasket is in place, it prevents oil from leaking out onto the outside of the engine. Because of the tremendous heat produced by an engine, valve cover gaskets may break down over time, causing leaks.
The engine valve cover is typically the topmost part of an engine and is marked with either the name of the manufacturer or the size of the engine. A valve cover gasket is put in place because the metal of the valve cover does not seal tightly enough against the metal of the top of the engine. The rubber or cork material of the valve cover gasket ensures a good seal, and helps prevent oil from spilling out of the top of the engine.
Valve cover gaskets do not typically last the life of a vehicle and should be monitored at the time of every service. Checking for oil around the valve cover is especially important for vehicles with four-cylinder engines because of an increased chance that oil could spill into spark plug tubes, causing misfires.
Oil leaks can cause damage to any engine and should be dealt with immediately.
Blown Valve Cover Gaskets: The tremendous heat an engine produces can cause valve cover gaskets to become brittle and break down over time.
Damaged Valve Covers: When replacing your valve cover gasket, a mechanic should also examine your valve cover(s) to make sure they are still intact. Damage to a valve cover could also cause an oil leak.
A top-rated mobile mechanic will come to your home or office to determine the cause of the oil leak and make sure the valve cover gasket needs to be replaced. The mechanic will then provide a detailed inspection report outlining the cause of the leak and the cost of any repairs that need to be made.
A mechanic will perform a thorough inspection of the engine bay and determine the source of the leak. If the source seems to be coming from the valve cover gasket, the mechanic will remove the valve cover and gasket. Different engines require different gaskets. Our mechanics will make sure they find the one that fits your vehicle exactly. A poorly-fitting gasket will not be able to do its job as effectively.
After installing the new gasket, the mechanic will examine the valve cover to make sure it is fully intact. If not, the mechanic will replace the valve cover and check the engine oil level. If your engine sprung an oil leak due to a damaged valve cover, your vehicle might be low on oil. Our mechanics will make sure your oil is topped-off before they leave. The mechanic should then start the engine and examine the valve cover gasket again to make sure it was installed properly and is not leaking.
While a small oil leak may not seem like a major issue, it can lead to both potentially dangerous and potentially costly repairs. A proactive approach to maintaining the life of an engine should include a check for oil around the valve cover. If oil leaks are discovered early, a mechanic can make the necessary repairs and avoid more significant engine issues. Oil leaks of any kind should be taken seriously and should be reported to a mechanic.
Fast and easy service at your home or office
Backed by 12-month, 12.000-mile guarantee
Real customer reviews from Jeep owners like you.