Jeep Grand Cherokee Car idle is rough Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(9)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(9)

Car idle is rough Inspection Service

How much does a Car idle is rough Inspection cost?

On average, the cost for a Jeep Grand Cherokee Car idle is rough Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Jeep Grand CherokeeV8-6.4LService typeCar idle is rough InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2008 Jeep Grand CherokeeV6-3.0L Turbo DieselService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1999 Jeep Grand CherokeeV8-4.7LService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Jeep Grand CherokeeV8-6.4LService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2009 Jeep Grand CherokeeV8-6.1LService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2019 Jeep Grand CherokeeV8-6.2L TurboService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1999 Jeep Grand CherokeeL6-4.0LService typeCar idle is rough InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2013 Jeep Grand CherokeeV6-3.6LService typeCar idle is rough InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Jeep Grand Cherokee Car idle is rough Inspection prices

A rough idling engine can be caused by a number of issues, some of them are serious while others tend to be minor, but the symptoms remain pretty much the same. The car will feel rough and bouncy when the engine is running. The car will also idle below its regular speed, display inconsistent RPMs and may produce a shaking, skipping or slipping sound when the vehicle is running.

While a rough idling engine may seem to be a simple inconvenience it often indicates a deeper problem within the engine. The vehicle should be inspected and repaired as soon as possible because small problems have a way of turning into expensive repairs.

How this system works:

The idle speed of an engine is basically the rotational speed the engine runs on when it is un-coupled from the drivetrain and the throttle pedal is not being depressed. The idle speed is measured in the revolutions per minute of the crankshaft.

When an engine is running at idle speed it generates enough power to smoothly operate equipment such as the water pump, alternator, and power steering but not enough power to move the vehicle itself. A passenger car will usually idle between 600 RPMs and 1000 RPMs. A properly functioning idle should run smoothly without skipping or slipping.

Common reasons for this to happen:

  • Dirty Fuel Injectors: The fuel injection system injects fuel into the cylinders, which creates a mix of air, and fuel to ignite and burn. Fuel injectors have tiny nozzles to spray the fuel into the cylinder and they can become clogged over time.

A clogged or failing fuel injector creates a lack of fuel in the vehicle's engine. This can cause a rough idle, it can also cause symptoms such as slow acceleration or the car not feeling as if it has enough power. If the problem is addressed early, it is possible to clean the injectors, which will restore them to full function. If this condition is not addressed in a timely manner the injectors will need to be replaced.

  • Incorrect Idle Speed: While the average idle speed falls between 600 to 1,000 RPMs, if your vehicle is experiencing a rough idle it could be due to an incorrect idle speed setting. A trained mechanic can easily adjust the idle speed, and it should stay at the proper speed. If an adjusted idle speed becomes inconsistent or changes at random intervals there may be a bigger problem that needs to be explored.

  • Vacuum Leak: If the vacuum system has a leak, it can seriously affect the ability of the vehicle’s computer to regulate the air to fuel ratio. This can lead to a rough idle and if the problem is not addressed the car may experience slow acceleration and a lack of power. Vacuum leaks should be inspected and repaired immediately.

  • Incorrectly Installed or Damaged Plugs: Spark plugs are responsible for creating the spark that allows the vehicle to burn fuel. If spark plugs are improperly installed or malfunctioning, the idle speed can be affected. The vehicle's engine may vibrate or there may be slipping or straining sounds coming from the engine.

  • Defective or Clogged Fuel Pump: A rough idle can be related to fuel delivery issues. The fuel pump, which is responsible for pulling fuel from the gas tank to the fuel injectors, can become clogged or defective. If this happens the engine will not get enough fuel, which can cause a rough idle, sputtering, stalling and even slow acceleration.

  • Clogged Fuel Filter: A clogged fuel filter can cause similar problems. The job of the fuel filter is to screen out contaminants in the fuel, over time it will become clogged and need to be replaced. A rough idle is one symptom of a clogged fuel filter.

  • Failing Electrical Components: A problem or failure in the ignition system or various electronic components can cause a rough idle. If this is the case, the problem will usually get worse as RPMs increase. Common culprits include the ignition control module, plug wires, coils, and spark plugs.

  • Defective Airflow Sensor: A defective airflow sensor can be responsible for a rough idle. A mass airflow sensor detects the amount of air coming into the fuel injection system and sends that information to the vehicle's computer. The computer uses that data to deliver the proper amount of fuel to the air in the vehicle. Over time these sensors can malfunction or become dirty. One of the first symptoms of a malfunctioning airflow sensor is a rough idle. The car may also accelerate slowly and even stutter or stall as the problem progresses.

  • Dirty Oxygen Sensor: Oxygen sensors measure how rich or lean the gases are as they exit the combustion chamber. Depending on the results, the amount of fuel entering the engine is adjusted by the vehicle computer. The ultimate goal is to maintain an ideal mixture that produces the lowest emissions. A dirty or failing oxygen sensor will usually trigger the check engine light and can lead to a rough idle, lower fuel efficiency and failed emission test.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the rough idle issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car for leaks and defective parts. This includes airflow sensors, fuel pump, electronics and other important components related to your car's idling state. It may be necessary to crank the car and test drive it in order to verify the problem and provide an accurate diagnosis.

How important is this service?

A rough idling car is more of an inconvenience at first but if the problem is not solved it can quickly lead to bigger problems such as slow acceleration, stalling and eventually a vehicle that will not start at all. Most of these conditions can make the vehicle dangerous to drive. A rough idle should be inspected and repaired as quickly as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Joseph

20 years of experience
640 reviews
Joseph
20 years of experience
Jeep Grand Cherokee L6-4.0L - Car idle is rough - Roy, Utah
Joseph was excellent he diagnosed Jeep in about 5 minutes refunded half the original quote it was a very good experience thanks for the help

Jay

37 years of experience
947 reviews
Jay
37 years of experience
Jeep Grand Cherokee L6-4.0L - Car idle is rough - Beaumont, California
Jay is my go to mechanic!!! I trust no one touching my jeep so for me to say he ia a my go to guy says a lot!!! He is honest and that means a lot to me.

Chris

15 years of experience
312 reviews
Chris
15 years of experience
Jeep Grand Cherokee L6-4.0L - Car idle is rough - San Diego, California
I really appreciate the responsiveness, clear communication, and as always, how easy this process was.

Carlos

21 years of experience
47 reviews
Carlos
21 years of experience
Jeep Grand Cherokee L6-4.0L - Car idle is rough - Houston, Texas
Carloss was early, very thorough and explained the car repair in specifics. He will complete tomorrow.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Jeep Grand Cherokee Car idle is rough Inspection services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Nissan Xterra
The The 2012 Nissan Xterra is designed for those who want a true sport utility that can still handle off-road driving with ease. Built on the same F-Alpha platform seen in the Titan and Frontier trucks, the Xterra also sports...
P3461 OBD-II Trouble Code: Cylinder 8 Exhaust Valve Control Circuit Malfunction
P3461 P3461 code definition P3461 is the generic OBD-II code for Cyl8 Exhaust Valve Ctrl Circ/Open. Cyl8 specifies that the issue is likely taking place in engine cylinder number 8. Other exhaust valve codes may accompany P3461. What the P3461...
P001A OBD-II Trouble Code: "A" Camshaft Profile Control Circuit/Open
P001A means the camshaft and crankshaft signals have malfunctioned which may cause a poorly running engine, reduced power or a no-start condition.

Lights for the dashboard are not very effective

Your issue is somewhat unique and may be difficult to diagnose, mostly because of the random nature of its occurrence. That being said, it is important to look at other things that are happening at the same time of the...

A.c blows cold air when stopped but after driving for a few mins it makes a hissing sound and blows hot air

It could be that the evaporator is freezing up. If the air conditioner works TOO well, ice can form on the evaporator core. When that happens the AC will blow hot air until the ice melts. There is supposed to...

My check engine light is on and P0141 code is showing. Please let me know if you can diagnose the problem and let me know the quot

Hi Anil. Thanks for contacting us today. P0141 is the OBD-II generic code (https://www.yourmechanic.com/article/p0141-obd-ii-trouble-code-o2-sensor-heater-circuit-malfunction-bank-1-sensor-2-by-jay-safford) indicating the Engine Control Module (ECM) has tested the O2 sensor heater circuit and detects a problem with the bank 1 sensor 2 oxygen sensor heater...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com