Jaguar XJRS Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(890)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(890)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Jaguar XJRS Brake Drum Replacement is $364 with $212 for parts and $152 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Jaguar XJRSV12-6.0LService typeBrake Drum ReplacementEstimate$608.96Shop/Dealer Price$755.22 - $1103.96
Show example Jaguar XJRS Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jaguar mechanics

Real customer reviews from Jaguar owners like you.

Excellent Rating

(890)

Rating Summary
820
32
9
4
25
820
32
9
4
25

Adam

17 years of experience
230 reviews
Adam
17 years of experience
Jaguar Vanden Plas V8-4.2L - Coolant Reservoir - Boca Raton, Florida
As formerly mentioned in an earlier survey, Mr. Adam Irani is indeed a super mechanic and potential customers of Your Mechanic should be more than delighted to have their vehicles serviced by him. His knowledge and competence within his field is undoubtedly in a class of its own. I have been completely satisfied with the work he performed on my Jaguar Vanden Plas. Consequently without hesitation, I would fully recommend Mr. Irani to other Jaguar owners seeking great service.

Luis

18 years of experience
321 reviews
Luis
18 years of experience
Jaguar F-Type L4-2.0L Turbo - Car is not starting - Westwood, New Jersey
Not only an excellent mechanic, very kind and patient! Thank u

Kris

12 years of experience
44 reviews
Kris
12 years of experience
Jaguar XJ V8-5.0L - Brake Pads Replacement (Front) - Mableton, Georgia
Great experience. Quality work. Fair price

Matthew

33 years of experience
1222 reviews
Matthew
33 years of experience
Jaguar X-Type V6-2.5L - Ignition Coil - Norfolk, Virginia
Does a great job every time!

Excellent Rating

(890)

Rating Summary
820
32
9
4
25
820
32
9
4
25
Number of Jaguar services completed
9790+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jaguar MECHANICS
400+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Thermostat
While While many people are familiar with the major parts in their vehicle, there are all kinds of smaller parts that play a vital role as well. The thermostat is one of those parts that many don't think about, but...
Symptoms of a Bad or Failing Yaw Rate Sensor
Common signs include the Check Engine Light, Vehicle Stability, or Traction Control Lights coming on and the Stability Control Light flashing.
How Long Does a Supercharger Belt Last?
Both Both superchargers and turbochargers are used on today’s vehicles to provide extra power and performance. While they do essentially the same thing (injecting additional air into the intake), they work in different ways. Turbochargers work based on exhaust, which...

How do I turn on the air conditioning?

To turn on the air conditioning, press the A/C button on the climate controls. The air conditioning will only come on if fan is on, the temperature is not below freezing, and the AUTO button has not been pressed.

I get a check-engine light and Reduced power. Throttle not responding on hill climbs.

Hi there. The first thing to do is get a code reader and check the codes that the engine has stored since the engine light is on. This will give you a starting point and a place to check for...

i'm planning to buy a 2016 camaro LT 1 2.0 L with i-4 turbo engine. i did a test drive and its not making noise, Can i make my car

You can change the exhaust after the catalyst to a performance exhaust. This will give you more power and louder exhaust depending on the system you purchase. Some aftermarket sites will give you a soundbite of what the exhaust will...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com