Isuzu Pickup Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Isuzu Pickup Car Thermostat Replacement is $203 with $63 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Isuzu PickupV6-3.1LService typeCar Thermostat ReplacementEstimate$318.08Shop/Dealer Price$362.45 - $487.46
1994 Isuzu PickupL4-2.3LService typeCar Thermostat ReplacementEstimate$313.15Shop/Dealer Price$356.77 - $483.52
1992 Isuzu PickupL4-2.3LService typeCar Thermostat ReplacementEstimate$311.01Shop/Dealer Price$354.12 - $479.28
1990 Isuzu PickupL4-2.3LService typeCar Thermostat ReplacementEstimate$315.15Shop/Dealer Price$359.30 - $487.56
1991 Isuzu PickupL4-2.6LService typeCar Thermostat ReplacementEstimate$315.15Shop/Dealer Price$360.77 - $490.14
1995 Isuzu PickupL4-2.3LService typeCar Thermostat ReplacementEstimate$313.15Shop/Dealer Price$356.94 - $483.81
1992 Isuzu PickupV6-3.1LService typeCar Thermostat ReplacementEstimate$309.07Shop/Dealer Price$351.71 - $475.43
1991 Isuzu PickupL4-2.3LService typeCar Thermostat ReplacementEstimate$315.15Shop/Dealer Price$359.30 - $487.56
Show example Isuzu Pickup Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(8)

Rating Summary
7
1
0
0
0
7
1
0
0
0

Kahlin

18 years of experience
41 reviews
Kahlin
18 years of experience
Isuzu Pickup L4-2.6L - Air Filter - San Diego, California

Jose

15 years of experience
79 reviews
Jose
15 years of experience
Isuzu Pickup L4-2.6L - Starter - Tucson, Arizona
Good job from a real nice person.

Brandon

19 years of experience
318 reviews
Brandon
19 years of experience
Isuzu Pickup L4-2.3L - Alternator Belt - Raleigh, North Carolina
As a first time customer of Your Mechanic, I did not know what to expect. I am proud to say my first experience was not disappointing. Brandon arrived early for the appointment. He was very professional and answered all questions that I had. He completed the repair in a timely manner and documented each step along the way. He did a vehicle check and provided suggestions for other minor repairs that may be needed in the future. I will certainly use Your Mechanic again, and will recommend Brandon as the mechanic.

Charles

35 years of experience
342 reviews
Charles
35 years of experience
Isuzu Pickup L4-2.3L - Oil Pan Gasket - Manor, Texas
Ran into some issues but stuck it out and took his time to get it done right.

Excellent Rating

(8)

Rating Summary
7
1
0
0
0
7
1
0
0
0
Number of Isuzu Pickup services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

What Is a Vehicle's Electrical Control Unit?
You’ll You’ll hear the term ECU bandied about in automotive circles, but what does it mean? The most basic definition is “electrical control unit” (ECU) which is a generic term applied to any system that controls a system or subsystem...
How to Prepare for the Georgia Driver’s Written Test
Do Do you daydream about being behind the wheel and driving? Before you can get your own license, you first need to pass the Georgia driver’s written test so you can get a permit and take a road test. The...
P0326 OBD-II Trouble Code: Knock Sensor Range/Performance (Bank 1 or Single Sensor)
P0326 code definition Knock Sensor 1 Circuit Range/Performance (Bank 1 or Single Sensor) What the P0326 code means The P0326 code means...

Clicking sound when turning.

This is something I like to describe as the “infamous clicking when turning” concern. Rest assured this is a very common problem. In most cases, this clicking noise is due to a failing axle shaft assembly. (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement) On each end...

condor brake shoes

As you may know, the hand brake (emergency brake) is also a drum brake which requires the use of brake shoes instead of brake pads on most modern vehicles. The seals being damaged suggests that there may be some issues...

The key  has broken off inside the ignition and we need to know how or what we can do to get it fixed., please

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com