Isuzu i-370 Camshaft Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(329)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(329)

Camshaft Position Sensor Replacement Service

How much does a Camshaft Position Sensor Replacement cost?

On average, the cost for a Isuzu i-370 Camshaft Position Sensor Replacement is $195 with $55 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Isuzu i-370L5-3.7LService typeCamshaft Position Sensor ReplacementEstimate$272.98Shop/Dealer Price$306.08 - $397.26
2008 Isuzu i-370L5-3.7LService typeCamshaft Position Sensor ReplacementEstimate$256.95Shop/Dealer Price$286.52 - $371.12
Show example Isuzu i-370 Camshaft Position Sensor Replacement prices

What is the Camshaft Position Sensor all about?

The camshaft position sensor monitors the position of the camshaft and reports that data to the car’s onboard computer system. This computer system works with sensors and other devices to keep the engine running. With data from the camshaft position sensor (CPS), the fuel injectors know when to fire.

When the sensor malfunctions, the computer does not know when to fire the injectors and may not fire them at all. The faulty readouts may also throw off spark timing, which will affect the car’s fuel economy. This sensor is used in conjunction with the crankshaft position sensor to control ignition timing. It is common for heat and oil leaks to cause this sensor to fail, due to where the sensor is located.

Keep in mind:

  • Damage to the camshaft position sensor is often caused by oil leaks; if this is the case, you may need another part of your car replaced or repaired.
  • When the camshaft position sensor is replaced, the alignment of the timing belt should be monitored so that no fluids leak onto the position sensor mounting area.
  • Some camshaft position sensors will need to have their software updated when they are installed.
  • Timing belts, mass air flow sensors, and crankshaft position sensors can all trigger the trouble code for the camshaft position sensor.

How it's done:

  • Scan test computer for trouble codes.
  • Pinpoint tests as per flow charts.
  • Remove and replace Crankshaft Position Sensor.
  • Clear trouble codes.
  • Check for proper operation and test drive car.

Our recommendation:

The camshaft position sensor isn’t checked in most regular services, but your vehicle has warning signs for when the sensor begins to fail. Because it sends information to the camshaft, when the sensor begins to fail your engine will begin to have trouble. Your engine may have a hard time turning on, staying on, idling, or running smoothly. Your Check Engine warning light should illuminate as well.

What common symptoms indicate you may need to replace the Camshaft Position Sensor?

  • Car stalls or does not start.
  • Car struggles to accelerate (does not maintain speed).
  • Check Engine light is on.
  • Car misfires.
  • Car stumbles or sputters on startup.
  • Car runs poorly or runs rough.

How important is this service?

The camshaft position sensor provides valuable information about the camshaft position to the computer management system. The computer system uses the information from the position sensor to determine when to inject more fuel. Without the sensor’s information, the computer won’t inject fuel properly, and your vehicle will stall or sputter.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(329)

Rating Summary
305
14
0
2
8
305
14
0
2
8

Wingrove

33 years of experience
4 reviews
Wingrove
33 years of experience
Isuzu Rodeo V6-3.2L - Camshaft Position Sensor - Lakeland, Florida
Good mechanic, knew what he was doing and did the job right and quick.

Lance

15 years of experience
27 reviews
Lance
15 years of experience
Isuzu Rodeo L4-2.2L - Valve Cover Gasket - San Antonio, Texas
Second time with Lance as my mechanic. Great experience. Better than the first.

Nolan

31 years of experience
296 reviews
Nolan
31 years of experience
Isuzu Rodeo V6-3.2L - Check Engine Light is on Inspection - Tucson, Arizona
Did a great job explaining what was wrong and what it would take to fix it. Really kind and helpful. Didn't pressure me to accept any service. Just felt like a really honest and helpful guy.

Guillermo

8 years of experience
33 reviews
Guillermo
8 years of experience
Isuzu Rodeo V6-3.5L - Exterior Door Handle Replacement (Driver Side Front) - Las Vegas, Nevada
Guillermo was awesome!! Quick, knowledgable, and very friendly.

Excellent Rating

(329)

Rating Summary
305
14
0
2
8
305
14
0
2
8
Number of Isuzu services completed
3619+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

How to Replace a Manifold Temperature Sensor
Signs of a failing manifold temperature sensor include rough idling and a rough running engine, and may result in a failed emissions test.
How Long Does an Injector Control Pressure Sensor Last?
A A diesel engine is a very sensitive and complicated piece of machinery. Getting a diesel to crank will require a number of parts to work together. Among the most vital systems on a diesel engine is the fuel injection....
How Long Does an EGR Temperature Sensor Last?
Are Are you familiar with the EGR (exhaust gas recirculation) system in your car? If not, this is something all modern cars have. The purpose of this system is to greatly reduce the amount of emissions produced by your car....

Problem starting car and dies while driving

This sounds like it could be a faulty crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) or a camshaft sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). These engines had problems with both. The hard start and the backfire (https://www.yourmechanic.com/services/engine-is-backfiring-inspection) may be the camshaft sensor. The stall and no start condition...

Mitsubishi Triton 4D56 - Engine Light and no start

Hey there. This code suggests that the intake throttle valve is not functioning correctly. When you say you give it gas and it starts, does this mean you are opening the throttle valve and putting gas into the engine manually?...

Where is the abs brake sensor located on the vehicle

Hi there. You vehicle is equipped with quite a few ABS brake sensors. I would need to know which one you are looking for to be exact as to where it is located. If it is a wheel speed sensor...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com