Isuzu i-280 Gears slipping when accelerating Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(313)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(313)

Gears slipping when accelerating Inspection Service

How much does a Gears slipping when accelerating Inspection cost?

On average, the cost for a Isuzu i-280 Gears slipping when accelerating Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-280L4-2.8LService typeGears slipping when accelerating InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Isuzu i-280 Gears slipping when accelerating Inspection prices

When you press the gas pedal and the transmission is in drive, you expect your vehicle to accelerate smoothly. That’s how things work when your transmission is healthy, but if you’re noticing that the gears are slipping when accelerating, there’s a serious problem that needs to be addressed as soon as possible.

How this system works:

Your transmission is a complex system with a very wide range of components. That’s true whether you have an automatic or a manual transmission. With that being said, slipping is much more common in an automatic transmission than in a manual, so we’ll focus our attention there. Really, the primary cause of slipping in a manual transmission is a damaged clutch, which should be replaced.

In an automatic transmission, everything must work in harmony in order to shift gears and provide power. The fluid level must be full (without the right amount of fluid, your transmission may slip badly), and it should be clean. You also have a number of clutch packs scattered throughout the transmission that need to engage at the right time. Transmission bands connect the gears together, and they can become worn or damaged over time.

If debris or contaminants clog up the system, or have blocked up the filter, it’s impossible for the transmission to work properly.

Common reasons for this to happen:

  • Low Transmission Fluid: If you’re of driving age, you’ve heard this one time and again, but it bears repeating. The number one cause of all transmission problems, from slipping to abnormal sounds, is low transmission fluid. If the fluid is low, a number of problems can crop up that will make the transmission slip, including overheating.

  • Fluid Is Burnt: Just as you need the right level of transmission fluid, you also need that fluid to be in good condition. Like engine oil, transmission fluid needs to be changed periodically, or it becomes burnt and the level of contaminants in the fluid can rise to dangerous levels.

  • Transmission Fluid Leaks: This one relates directly to low fluid, but it’s the cause of the transmission fluid being low. Transmission leaks can range from miniscule to catastrophic, but they all affect the level of fluid in your transmission.

  • Gear Wear: If you have a high-mileage vehicle with the original transmission, the gears may just be worn out. This applies even if you’ve taken care of the transmission with regular services. There are simply only so many miles the average transmission can operate. If your gears are worn, they won’t mesh together properly, creating slippage.

  • Broken Transmission Bands: Transmission bands connect the various gears in your transmission to one another. Over time (and particularly if you don’t maintain the transmission or drive with low fluid), they wear. Once they become too worn, or they break, your transmission will slip.

  • Failing Torque Converter: The torque converter is what transforms energy from the engine into something your transmission can use. They work with transmission fluid, so low fluid levels could cause damage here as well. Once the torque converter is damaged, your transmission will slip.

What to expect:

A top-rated mobile mechanic will come to your home or office to verify the operation of your transmission, including slipping and any abnormal noises. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your transmission and may need to pull trouble codes from the car’s computer via the OBD II interface. A test drive may also be necessary to verify that the transmission is slipping, as well as any unusual/abnormal sounds it might be making during operation.

How important is this service?

If your transmission is slipping, it’s crucial to have the problem repaired immediately. Even if it is slipping for something as simple as low fluid, that situation can quickly lead to very serious damage. One of our professional mechanics can diagnose the reason for the slippage and get your transmission back into good condition.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Brake Light Switch - Kennesaw, Georgia
Corey did an awesome job!

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Car is not starting - Kennesaw, Georgia
Extremely knowledgeable and very honest!!

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Isuzu Rodeo V6-3.2L - Check Engine Light is on - Houston, Texas
Daniel was very proffessional and efficient. I would recommend him to family and friends.

Jeff

20 years of experience
13 reviews
Jeff
20 years of experience
Isuzu Rodeo V6-3.2L - Car is not starting - Tucson, Arizona
He's awesome!

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8
Number of Isuzu services completed
3443+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You Live in the Country
Living Living in the country is a whole different way of living. You deal with rough and uneven roads, mud, snow, rain, and ice and you need a vehicle that can stand up to these kinds of conditions with ease....
How Long Does a Speed Sensor Last?
Today’s Today’s cars are equipped with a very wide range of sensors. Yours has a mass airflow sensor, at least one oxygen sensor, and many others. The vehicle speed sensor (VSS) is usually located on the transmission’s output shaft (although...
P0205 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 5
P0205 P0205 code definition Injector Circuit Malfunction - Cylinder 5 What the P0205 code means P0205 is a generic diagnostic trouble code which indicates that the injector circuit for cylinder 5 has out of range voltage or resistance. This is...

Driver side window goes down but not up

When you operate the driver's window switch, if you hear the motor run in both directions, then the window regulator (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-window-motor-regulator-assembly) is most likely broken. The window regulator may require the motor and regulator together depending on part availability. If...

AC issue - 2008 Dodge Charger

Hi there. If the compressor is turning on and if the pressures are correct, then the lines need to be checked. If one of the lines going into the firewall are cold then the system may be working fine. If...

I have a 1997 Nissan Maxima GLE and I have no presser on my clutch pedal. If you pump it by hand real fast it will hold presser for a short time.

Hi there. The issue is the clutch master cylinder has an issue with the internal seals and is causing the brake fluid to slosh around in the chamber. I recommend replacing the clutch master cylinder. If you need further assistance...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com