Isuzu i-280 Brake Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(313)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(313)

Brake Hose Replacement Service

How much does a Brake Hose Replacement cost?

On average, the cost for a Isuzu i-280 Brake Hose Replacement is $267 with $48 for parts and $218 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-280L4-2.8LService typeBrake Hose - Driver Side Front ReplacementEstimate$386.16Shop/Dealer Price$439.58 - $548.09
2006 Isuzu i-280L4-2.8LService typeBrake Hose - Passenger Side Front ReplacementEstimate$315.42Shop/Dealer Price$362.70 - $452.68
2006 Isuzu i-280L4-2.8LService typeBrake Hose - Passenger Side Rear ReplacementEstimate$340.28Shop/Dealer Price$393.77 - $502.40
2006 Isuzu i-280L4-2.8LService typeBrake Hose - Driver Side Rear ReplacementEstimate$340.28Shop/Dealer Price$393.72 - $502.31
Show example Isuzu i-280 Brake Hose Replacement prices

What is the brake hose and how does it work?

The hydraulic steel brake lines that carry brake fluid in your car are bolted to the frame of the vehicle. These metal brake lines must eventually attach to the individual wheel calipers — or wheel cylinders in the case of drum brakes — at all four wheels. Since the wheels constantly move up and down, or left and right in the case of the front wheels, the brake line that attaches to the individual wheel calipers must be highly flexible. Enter the brake hose: a flexible, synthetic, reinforced-rubber hose designed to withstand the 1,000 PSI plus pressures that occur when you apply the brakes. There is at least one brake hose at each wheel position, and sometimes two depending on the suspension design. At the end of each rubber hose are steel connections with seals to maintain a leak-proof connection.

Brake Hoses

When to consider replacing the brake hose:

  • Physical damage. If there are cuts, cracks, abrasions, bulging, or excessive rust at the hose fitting ends, the hose should be replaced.
  • Leaks. Seepage at hose fittings, or leaks anywhere along the hose, requires replacement. If there is a leak, or the hose is bulging, you may notice that the brake pedal is lower than usual or spongy.
  • Internal hose failure. Occasionally, the lining on the interior of the hose can separate, blocking the flow of hydraulic fluid. This is diagnosed using test gauges. A fluid blockage that prevents the brakes from releasing may manifest itself as dragging brakes or overheated brakes.
  • End of Lifetime. Although many brake hoses can last 20 plus years if well-made out of quality materials, after 10 years of service it is best to replace the hoses with new ones for maximum reliability and safety.

How do mechanics replace the brake hose?

  • The vehicle is jacked up and safely supported with steel jack stands.
  • The wheel and tire assembly are removed.
  • A pan is put in place to catch brake fluid.
  • Residual pressure in the brake line is relieved by momentarily opening the brake caliper bleeder screw.
  • Each hose end is detached. At the caliper, the attachment is often a banjo style bolt with one-time-use copper washers. The attachment at the vehicle frame is typically a flare connection, so a tube nut must be loosened. Once both ends are detached, the hose is removed.
  • The new hose is installed using new copper-sealing washers and the factory OEM torque on the tube nut and the banjo bolt.
  • Finally, the brake system is bled to remove all air and the vehicle is road tested. A final check for leaks is performed after the road test.

Is it safe to drive with a brake hose problem?

No. Properly working brakes are always essential. If you suspect damage to the brake hoses or see leaks it is a good idea to have a professional evaluate your car’s brakes.

When replacing a brake hose keep in mind:

  • If a brake hose is replaced due to aging, the mechanic will check all of the other brake hoses as they may be worn or defective as well.
  • Some vehicles have flexible, braided stainless steel brake hoses, or other specially designed hoses. If your car does not have ordinary synthetic rubber hoses, a mechanic will let you know what type of new brake hose you have and what your replacement options are.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Brake Light Switch - Kennesaw, Georgia
Corey did an awesome job!

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Car is not starting - Kennesaw, Georgia
Extremely knowledgeable and very honest!!

Lucas

21 years of experience
891 reviews
Lucas
21 years of experience
Isuzu Rodeo V6-3.2L - Check Engine Light is on - Los Angeles, California
Really great service.

Jay

37 years of experience
959 reviews
Jay
37 years of experience
Isuzu Trooper V6-3.5L - AC is not working - Upland, California
Jay can best be described in one word - AWESOME! It's no wonder that customers fight over his appointment slots ...

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8
Number of Isuzu services completed
3443+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Porsche Cayenne
If If you’re looking for an SUV that offers plenty of cargo space, the ability to tow more than 7,000 pounds and that has luxury and fun to drive appeal, the 2012 Porsche Cayenne is your answer. Key Features All...
How to Choose What Type of Car You Would Like to Build
Car Car shows are packed with vehicles that have been customized to one degree or another. Many custom cars have everything from custom paint jobs to engine modifications, from oversized wheels (https://www.yourmechanic.com/article/all-about-oversized-wheels-and-tires) to personalized interior work, even sound system or...
Understanding the Mercedes-Benz Active Service System (ASSYST, ASSYST PLUS, ASSYST Fixed Intervals) Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Mercedes-Benz Active Service System indicates when and what service your car needs.

Coolant is leaking, but vehicle not overheating.

Hello, a coolant leak with no external leaks leads me to believe you might have an internal leak at the head gasket. The first thing to do would be to check the oil and see if it looks like chocolate...

Car pulls to the right at different speeds

Thanks for writing in about your 2012 BMW 535xi. There are several potential causes for the car to pull in one direction. The pull you're feeling may just be due to the crown of the road. Other potential causes include...

Whining noise when I hit a certain RPM? Jerks while driving?

The problem sounds like the transmission is not shifting. This can be caused by several possible causes. You will need to have the computer tested for stored codes to see if it points to the transmission or other possible problems....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com