Isuzu Axiom Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(13)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(13)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a Isuzu Axiom Car shuts off when stepping on gas pedal Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Isuzu AxiomV6-3.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2003 Isuzu AxiomV6-3.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Isuzu AxiomV6-3.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Isuzu Axiom Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(13)

Rating Summary
12
1
0
0
0
12
1
0
0
0

John

20 years of experience
581 reviews
John
20 years of experience
Isuzu Axiom V6-3.5L - Check Engine Light is on - Orlando, Florida
Very professional! Easy to understand!

Luis

15 years of experience
186 reviews
Luis
15 years of experience
Isuzu Axiom V6-3.5L - Mass Airflow Sensor - Las Vegas, Nevada
Luis is a great mechanic who gets the job done in a timely and professional manner. I was so impressed with his services that I booked him for a future appointment to perform more work on my car.

Ricardo

23 years of experience
199 reviews
Ricardo
23 years of experience
Isuzu Axiom V6-3.5L - Car is overheating - Miami, Florida
top notch service!!

Noe

36 years of experience
604 reviews
Noe
36 years of experience
Isuzu Axiom V6-3.5L - Brake Rotor/Disc Replacement (Rear) - Auburn, Washington
This was the 2nd time Noe has worked on my SUV and same as the first time, I am very pleased with the work that he has done.

Excellent Rating

(13)

Rating Summary
12
1
0
0
0
12
1
0
0
0
Number of Isuzu Axiom services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

New Hampshire Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of New Hampshire. Speed limits in New Hampshire 70 mph: I-93 from mile marker 45 mph to the Vermont...
P2128 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch "E" Circuit High Input
P2128 P2128 trouble code definition The pedal position sensor is used as an input to the engine control module (ECM) to determine the amount of torque requested by the operator. The ECM should receive an input that is within the...
How to Replace a Rear Window Transmission
The rear window has a transmission that fails if the window jerks, stops halfway, or does not move at all. A door light may also illuminate.

Need to replace clutch but also looks like bell housing cracked around the starter to transmission?

Hello there. Clutch replacement in your 2006 Dodge Dakota is a large job. To replace the clutch, many components such as the transmission and driveshaft must be removed. If you are unsure at all about doing this job, it should...

Issue with Mazda 626, starts up then makes a grinding noise while in park

Your symptoms suggest that the starter solenoid contacts are burned enough to stick in the "Start" position (engaging the starter drive and motor), even when the ignition switch is not energizing the relay portion of the starter solenoid. The starter...

What would cause a popping noise and shaking when turning in my 2006 Honda Civic.

Hello. Most of the time if you get a popping noise when turning it is because you have worn out cv axles. When the joints in the axles where out this noise will occur. They would need to be inspected....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com