Isuzu Amigo Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Isuzu Amigo Headlight Bulb Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Isuzu AmigoV6-3.2LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$184.44Shop/Dealer Price$195.40 - $220.18
1992 Isuzu AmigoL4-2.6LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.20 - $255.40
1998 Isuzu AmigoL4-2.2LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$175.43Shop/Dealer Price$184.65 - $208.12
1993 Isuzu AmigoL4-2.3LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
1998 Isuzu AmigoL4-2.2LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$175.43Shop/Dealer Price$186.12 - $210.70
1991 Isuzu AmigoL4-2.6LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.36 - $255.69
1992 Isuzu AmigoL4-2.3LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.24 - $255.47
1994 Isuzu AmigoL4-2.6LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
Show example Isuzu Amigo Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Shawn

24 years of experience
227 reviews
Shawn
24 years of experience
Isuzu Amigo V6-3.2L - Spark Plugs - Newport News, Virginia
Very professional, knowledgeable, respectful and polite.

Timothy

23 years of experience
107 reviews
Timothy
23 years of experience
Isuzu Amigo V6-3.2L - Intake Manifold Gaskets - Puyallup, Washington
Very knowledgeable, communicates if running late, overall great guy, would recommend

Harish

28 years of experience
588 reviews
Harish
28 years of experience
Isuzu Amigo L4-2.2L - Pre-purchase Car Inspection - Charlotte, North Carolina
Super awesome dude, talked me through the pre purchase inspection and gave me tons of advice

Chuy

15 years of experience
503 reviews
Chuy
15 years of experience
Isuzu Amigo V6-3.2L - Pre-purchase Car Inspection - Elk Grove Village, Illinois
Great dude-- Thanks Chuy!

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Isuzu Amigo services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

P2649 OBD-II Trouble Code: ‘A’ Rocker Arm Actuator Control Circuit High Bank 1
P2649 P2649 code definition ‘A’ Rocker Arm Actuator Control Circuit High Bank 1 What the P2649 code mean P2649 is an OBD-II code for the engine control module (ECM) detecting the ‘A’ rocker arm actuator control circuit for bank 1...
The Most and Least Expensive Cars to Own
Car value depends on purchase price, maintenance costs, and selling price. The Toyota Yaris, a discontinued model, costed $8000 less than in 2012.
How to Replace a Refrigerant Pressure Sensor
The air conditioning system has a refrigerant pressure sensor that goes bad when the air conditioning does not work or only works intermittently.

Filled in regular instead of premium fuel, CEL came on, P0022 code

Hello there, the P0022 code (https://www.yourmechanic.com/article/p0022-obd-ii-trouble-code-camshaft-position-a-timing-over-retarded-bank-2-by-jay-safford) is indicating that the car's computer has over-retarded the engine timing. This makes sense with the 87 octane gasoline used instead of the 93 octane gasoline. The car was most likely attempting to adjust...

Where is the block heater cord located

The block heater connection if equipped is behind the front Ford emblem. Just flip it toward the passenger side to open the power port.

How much does it cost to speak to a mechanic?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com