Infiniti JX35 Power Steering Pump Pulley Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(49)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(49)

Power Steering Pump Pulley Replacement Service

How much does a Power Steering Pump Pulley Replacement cost?

On average, the cost for a Infiniti JX35 Power Steering Pump Pulley Replacement is $285 with $95 for parts and $190 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Infiniti JX35V6-3.5LService typePower Steering Pump Pulley ReplacementEstimate$419.86Shop/Dealer Price$502.34 - $671.00
Show example Infiniti JX35 Power Steering Pump Pulley Replacement prices

What is the Power Steering Pump Pulley all about?

Like many other systems on your vehicle, your power steering operates on pressurized fluid, and the power for pressurizing that fluid is delivered by the engine. Depending on the year, make and model, your car may have a single drive belt, or two belts. In both situations, a belt will operate the power steering pump via a pulley. The belt runs around the pulley, and spins it while the engine operates. When the engine is off, the pulley remains still and the pump does not work.

As with any other pulley in the engine, the power steering pump pulley relies on a bearing to ensure that it operates correctly. Heat and friction will wear the bearings out and they will eventually need to be replaced. There are other instances that could cause problems with the power steering pump pulley, including serious auto accidents that bend or even break the pulley.

Keep in mind:

  • Power steering pump pulley and belt operation should be checked at regular maintenance (oil changes).
  • Bearing failure is the most common power steering pump pulley problem.
  • A broken belt can cause your power steering system to malfunction.
  • The belt can brake if bearings seize.

How it's done:

  • The hood is opened and the serpentine belt is removed
  • The power steering pulley is removed with a pulley puller
  • The new power steering pulley is installed using a pulley installer
  • The serpentine belt is installed and pulley alignment is checked
  • The engine is run and the power steering system operation is checked

Our recommendation:

Without an operational power steering pump pulley, your entire power steering system will be inoperable. The most common cause of problems here is wear and tear to the pulley bearing. The pulley will need to be removed, the old bearing pulled out, and a new bearing installed. Because of the importance of this system, we recommend having any power steering system problems be diagnosed by one of our expert mechanics.

What common symptoms indicate you may need to replace the Power Steering Pump Pulley?

  • Whining or grinding sound while engine is running
  • Power steering pump pulley is locked (won’t turn)
  • Power steering or serpentine belt is broken (possibly a sign of bearing failure)

How important is this service?

Some power steering systems aren’t as critical as others, but this one plays an important role in the drivability of your vehicle. If you notice any of the symptoms above, or suspect there’s a problem with the pulley or the bearing, you should have the system inspected immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(49)

Rating Summary
48
0
0
0
1
48
0
0
0
1

Jonathan

26 years of experience
88 reviews
Jonathan
26 years of experience
Infiniti JX35 V6-3.5L - Brake Rotor/Disc Replacement (Front) - Smyrna, Georgia
Very courteous and efficient. He arrived in time and finished on time.

Mazyar

8 years of experience
474 reviews
Mazyar
8 years of experience
Infiniti JX35 V6-3.5L - Brake Pads Replacement (Front, Rear) - Decatur, Georgia
Fast and efficient! Recommended our next needed services HONESTLY!

Okela

13 years of experience
47 reviews
Okela
13 years of experience
Infiniti JX35 V6-3.5L - ABS Light is on - Springfield Gardens, New York
I will use his sevice again and would Recommend to anyone

David

13 years of experience
400 reviews
David
13 years of experience
Infiniti JX35 V6-3.5L - Battery - Kennesaw, Georgia
David arrived an hour earlier to my great relief. He was friendly, professional, courteous, and knowledgeable.

Excellent Rating

(49)

Rating Summary
48
0
0
0
1
48
0
0
0
1
Number of Infiniti JX35 services completed
539+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
900+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy for Senior Citizens
Everyone Everyone needs a way to get around. You need to get groceries, get to doctors’ appointments, visit with family and more. However, senior citizens have very different needs when it comes to buying a used car than other demographics....
How to Buy a Good Quality Exhaust Gas Recirculation (EGR) Tube
Exhaust Exhaust gas recirculation tubes (EGR tubes) are responsible for moving a very small amount of gas from the exhaust manifold to the intake manifold in order to help reduce emissions of nitrous oxide. This tube is the key point...
Symptoms of a Bad or Failing PCV Valve Hose
Common signs include poor fuel economy, the Check Engine Light coming on, engine misfires while idling, and noise from the engine.

car died while idling engine cranks but won't start, just barely replaced upstream oxygen sensor.

Hi there. What you are describing in the diagnosis of your Hyundai's issues is the major reason why auto part store diagnosis tends to be incorrect. When they complete a 'scan' they simply download a code and make a general...

I put my 2002 chevy trailblazer in park, then realized that it kept moving, then I cut it off and it never started back up nor wou

A possibility is a broken shift cable. If the shift cable broke as you tried to select Park, or the cable became detached, the vehicle might not really be in Park (or neutral) and if that is the case the...

P0155 code, P01135 code , P0705

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com