Infiniti EX37 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Infiniti EX37 Mass Airflow Sensor Replacement is $280 with $185 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Infiniti EX37V6-3.7LService typeMass Airflow Sensor ReplacementEstimate$485.85Shop/Dealer Price$596.07 - $887.34
Show example Infiniti EX37 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Pierre

9 years of experience
309 reviews
Pierre
9 years of experience
Infiniti EX37 V6-3.7L - Serpentine/Drive Belt - Westwood, Massachusetts
Pierre has been very helpful, courteous, and professional

Antonios

18 years of experience
56 reviews
Antonios
18 years of experience
Infiniti EX37 V6-3.7L - Brake Pads Replacement (Front, Rear) - Westwood, Massachusetts
Very professional, does not try to make you buy what you don't need. Friendly and transparent. The experience was great, everything done at home and at a price you cannot beat.

James

31 years of experience
690 reviews
James
31 years of experience
Infiniti EX37 V6-3.7L - Battery - Santa Ana, California
On-time, quick, got my car working!

Ediee

5 years of experience
48 reviews
Ediee
5 years of experience
Infiniti G25 V6-2.5L - Mass Airflow Sensor - Las Vegas, Nevada
Amazing and extremely helpful!!! Thank you so much Eddie your the BEST☺️

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Infiniti Mass Airflow Sensor Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing EVP Position Sensor
Common signs include poor cold start performance, the Check Engine Light coming on, and failing an emissions test.
How to Replace a Brake Booster Vacuum Sensor
The brake booster vacuum pressure sensor is a vital part of power brake operation. A Check Engine Light or a hard brake pedal are signs of failure.
What Does the Rain and Light Sensor Warning Light Mean?
The rain and light sensor warning light indicates when there is an issue with the sensor system. It will remain deactivated until fixed.

Problem starting car and dies while driving

This sounds like it could be a faulty crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) or a camshaft sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). These engines had problems with both. The hard start and the backfire (https://www.yourmechanic.com/services/engine-is-backfiring-inspection) may be the camshaft sensor. The stall and no start condition...

The codes p0012 and p0015 was shown on the scanner when I had my car checked.

Hi there. The codes P0012 (https://www.yourmechanic.com/article/p0012-obd-ii-trouble-code-camshaft-position-a-timing-over-retarded-bank-1-by-jay-safford) and P0015 (https://www.yourmechanic.com/article/p0015-obd-ii-trouble-code-camshaft-position-b-timing-over-retarded-bank-1-by-jay-safford) are related to the camshaft position sensor. Check the sensor out and make sure that its plugged in. Also, check for power to the sensor. The camshaft sensor keeps the ignition...

Crankshaft positioning sensor location and easiest way to change

This engine has a crankshaft sensor mounted in the transmission housing at the left rear of the engine.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com