Hyundai Sonata Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Hyundai Sonata Front Crankshaft Seal Replacement is $173 with $19 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Hyundai SonataV6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$933.84Shop/Dealer Price$1044.28 - $1347.23
2009 Hyundai SonataV6-3.3LService typeFront Crankshaft Seal ReplacementEstimate$285.03Shop/Dealer Price$307.75 - $370.16
1992 Hyundai SonataL4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$1314.79Shop/Dealer Price$1484.16 - $1973.00
2009 Hyundai SonataL4-2.4LService typeFront Crankshaft Seal ReplacementEstimate$210.21Shop/Dealer Price$224.66 - $263.40
2004 Hyundai SonataV6-2.7LService typeFront Crankshaft Seal ReplacementEstimate$1104.46Shop/Dealer Price$1310.92 - $1914.58
1991 Hyundai SonataV6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$902.31Shop/Dealer Price$1007.13 - $1305.89
1990 Hyundai SonataL4-2.4LService typeFront Crankshaft Seal ReplacementEstimate$1046.49Shop/Dealer Price$1197.31 - $1636.30
2011 Hyundai SonataL4-2.4L HybridService typeFront Crankshaft Seal ReplacementEstimate$312.40Shop/Dealer Price$328.15 - $367.87
Show example Hyundai Sonata Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Joel

15 years of experience
1142 reviews
Joel
15 years of experience
Sonata 2009 - Front Crankshaft Seal - Jacksonville, FL
Quality professional work was completed well within the allotted time. Courteous and professional. Has my highest recommendation.

Dellano

13 years of experience
543 reviews
Dellano
13 years of experience
Sonata 2002 - Front Crankshaft Seal - Washington, DC
Really informative and a huge help. The most honest mechanic I met. Thx will definitely do business with again.

Alec

8 years of experience
13 reviews
Alec
8 years of experience
Sonata 2010 - Brake Rotor/Disc - Phoenix, AZ
Alec was able to come earlier than my original appointment which worked out great for me. He was quick, kind, knowledgeable, and thoroughly explained issues my car may have in the future and parts that will need to be replaced, including a time frame for everything.

Ben

10 years of experience
1 reviews
Ben
10 years of experience
Sonata 2017 - Oil Change - Vacaville, CA
Ben is awesome and took his time to cover everything. Will book again

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Hyundai Sonata Front Crankshaft Seal Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

What Typically Causes the Heating or AC to Stop Working?
While both the heating and AC are connected - to an extent - within your car, they’re actually...
Child Seat Safety Laws in California
California, California, like other states, has specific laws in place regarding the way that children are restrained in motor vehicles. For that matter, everyone in California is expected to buckle up – it’s just common sense. Children, of course, can’t...
Industry News for Automotive Techs: October 22-28
Japanese automakers step up security, Mercedes' X-Class pickup, carsharing with Turo, VW TDI settlement approved, Faraday Future behind on payments.

What does the electronic power steering light mean?

Your car does not have a conventional hydraulic power steering system. It’s equipped with an electronic power steering system (EPS). This system draws its power from the alternator and battery in the car, and does not require any fluid to...

Doors not locking

It sounds like you may be having some type of electrical problem. I Would recommend having a technician come out and inspect the electrical components (https://www.yourmechanic.com/services/electrical-components-are-not-working-inspection) on the four locks and look for a shorted wire or a bad switch...

Knock censor on a 98 honda passport

Hi Madison. Thanks for contacting us today. If you could supply us with the OBD-II trouble code you've received, we can help you understand all of the possible sources. In most cases, a code that indicates a sensor issue is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com