Hyundai Genesis Coupe Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(101)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(101)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a Hyundai Genesis Coupe Car shuts off when stepping on gas pedal Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Hyundai Genesis CoupeV6-3.8LService typeCar shuts off when stepping on gas pedal InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2010 Hyundai Genesis CoupeV6-3.8LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Hyundai Genesis CoupeL4-2.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Hyundai Genesis CoupeV6-3.8LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2015 Hyundai Genesis CoupeV6-3.8LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2011 Hyundai Genesis CoupeL4-2.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2013 Hyundai Genesis CoupeL4-2.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2013 Hyundai Genesis CoupeV6-3.8LService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Hyundai Genesis Coupe Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(101)

Rating Summary
89
9
3
0
0
89
9
3
0
0

Michael

6 years of experience
132 reviews
Michael
6 years of experience
Hyundai Genesis Coupe V6-3.8L - Window is not working - Seattle, Washington
Awesome customer service and super knowledgeable and helpful. Fixed my window too!!! So grateful!

David

26 years of experience
72 reviews
David
26 years of experience
Hyundai Genesis Coupe V6-3.8L - Spark Plugs - Kyle, Texas
Great work. On time and a good guy, would work with him again and highly recommended.

Carlos

28 years of experience
502 reviews
Carlos
28 years of experience
Hyundai Genesis Coupe L4-2.0L Turbo - Brake safety Inspection - La Puente, California
Carlos's was on time, very friendly, knew what was wrong with my car after driving it , and I would like to have him come back to work on my car again..

David

10 years of experience
170 reviews
David
10 years of experience
Hyundai Genesis Coupe L4-2.0L Turbo - Check Engine Light is on - Winter Springs, Florida
Knows what he’s talking about and explains clearly.

Excellent Rating

(101)

Rating Summary
89
9
3
0
0
89
9
3
0
0
Number of Hyundai Genesis Coupe services completed
1111+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

Veteran and Military Driver Laws and Benefits in Virginia
There There are many different benefits for veteran and active duty military who are in Virginia. There are also some laws and regulations that will be of interest to service members and former military members in the state. Vehicle registration...
What are the Car Pool Rules in Pennsylvania?
Every Every day, thousands of Pennsylvanians commute to work, and a large number of them rely on the state’s freeways to do so. Pittsburgh is a hub of business in Pennsylvania, and a huge amount of citizens commute into the...
P2568 OBD-II Trouble Code: Direct O-Zone Reduction Catalyst Temperature Sensor Circuit Range/Performance
P2568 P2568 code definition Direct O-zone Reduction Catalyst Temperature Sensor Circuit Range/Performance What the P2568 code means P2568 is an OBD-II generic code that the engine control module (ECM) has detected the engine o-zone reduction catalyst temperature sensor to be...

When the car hits 40 mph it feels like it wants to stall and slow down.

This is a sign of a potentially failing or dirty mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). This is a unit that regulates the air intake into your engine and ensures that proper air/fuel mix is injected into the engine. When this...

Car overheating and no heat

Hi There, It sounds like you may have a leaking or clogged heater core that may be prohibiting the outer linings of the heater core to get hot. As you know, the heater core is a series of tubes that...

Piston cylinder

A tutorial on cylinder honing (and grit size recommendations) is at this link (http://www.enginebuildermag.com/2004/05/cylinder-bore-refinishing/). For ring gap recommendations, please see this link (https://www.hastingspistonrings.com/tech-tips-faqs/checking-compression-ring-gaps) or the Factory Service Manual for your vehicle. If you have not honed cylinders in an engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com