Hyundai Entourage Ignition Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(58)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(58)

Ignition Switch Replacement Service

How much does a Ignition Switch Replacement cost?

On average, the cost for a Hyundai Entourage Ignition Switch Replacement is $271 with $131 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Hyundai EntourageV6-3.8LService typeIgnition Switch ReplacementEstimate$624.12Shop/Dealer Price$745.00 - $1099.54
2009 Hyundai EntourageV6-3.8LService typeIgnition Switch ReplacementEstimate$408.55Shop/Dealer Price$476.02 - $674.32
2010 Hyundai EntourageV6-3.8LService typeIgnition Switch ReplacementEstimate$408.55Shop/Dealer Price$476.05 - $674.36
2007 Hyundai EntourageV6-3.8LService typeIgnition Switch ReplacementEstimate$692.59Shop/Dealer Price$831.10 - $1242.44
Show example Hyundai Entourage Ignition Switch Replacement prices

What is the Ignition Switch all about?

The ignition switch, located on the steering column or in the dashboard, takes the power from the battery and directs it to all the accessories and electrical components of your car. It also transfers the power to the starter when you turn the ignition key. If the starter does not receive power from the ignition key, the car will not start. When the ignition switch goes bad, your car may not start and the accessories (lights, radio, etc.) may not work. Replacing an ignition switch can be as simple as removing a few screws to access the ignition switch, or as complicated as removing the whole steering column.

Ignition Switch

Keep in mind:

  • After an ignition switch is replaced, all electrical components should be checked to ensure proper operation.

How it's done:

  • Check the condition of the ignition switch.
  • Remove and replace the ignition switch if it is bad.
  • Verify operation of electrical components.

Our recommendation:

The battery feeds power to ignition switch, so it is important for the ignition system that the battery is in good condition. Don't put too much weight on your key ring because this can damage the key and the tumbler part of the ignition switch. If there is no power inside the car (none of the electrical components are working), have the mechanic inspect the main fuses. If the fuses are good, then the mechanic should inspect the ignition switch and other electrical components.

What common symptoms indicate you may need to replace the Ignition Switch?

  • Car may not start.
  • Car starts then dies.
  • Some electrical components may not work (radio, clock, lights, etc.).

How important is this service?

The ignition switch serves to send power from the battery. When you turn your key to turn on your vehicle, the ignition switch takes power from the battery and sends it to the starter, which allows your vehicle to turn on. When you turn on any electrical components in your vehicle (such as your lights, radio, and air conditioning), the ignition switch draws power from the battery, and sends it to these electrical components to power them. When your ignition switch stops working, your starter and your electrical components have no way of drawing power from your battery. With a faulty ignition switch, you won’t be able to use your radio, lights, or air conditioning, and you won’t be able to turn on your vehicle. In extreme cases, a broken ignition switch won’t allow you to turn your vehicle off, even if you remove the key.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(58)

Rating Summary
53
2
0
1
2
53
2
0
1
2

Damian

12 years of experience
465 reviews
Damian
12 years of experience
Hyundai Entourage V6-3.8L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Oxon Hill, Maryland
Very knowledgeable and want the extra mile.

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Hyundai Entourage V6-3.8L - Fuel Pump - Los Angeles, California
Knowledgeable, takes time to answer all questions.

David

8 years of experience
6 reviews
David
8 years of experience
Hyundai Entourage V6-3.8L - Brake Light Switch - Fort Mill, South Carolina
did great job getting off a difficult part and replacing it

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Hyundai Entourage V6-3.8L - Car is shaking or vibrating - Austin, Texas
Very professional

Excellent Rating

(58)

Rating Summary
53
2
0
1
2
53
2
0
1
2
Number of Hyundai Entourage services completed
638+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Fuel Rail Sensor
Common signs include the Check Engine Light coming on, the car not feeling right when running, and issues with starting the car.
How to Replace a Windshield Wiper Module
Car windshield wiper modules control the wiper speed. If windshield wipers aren't working, replace them immediately.
How to Get an Alaska Driver's Permit
In In order to begin driving on the roads in Alaska, anyone under the age of 16 years old must apply for and receive an Alaska Instruction Permit. This driver’s permit allows those who are at least 14 years old...

Engine misfiring - 2003 Santro Xing

Hey there. The problem with a misfire is going to involve the spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement) or spark getting to the plugs. If the engine has no spark problems, then a fuel-related issue may be you got water in the fuel...

No acceleration in drive

Hello - first task is to check to see if there are any problem codes set, whether the Check Engine light is on or not. It is possible that the transmission speed sensor is malfunctioning as you mention, and not...

Replaced battery 2015 Chrysler 200 starts runs gear knob turns but light is stuck on neutral and won't go

It sounds like you may have a faulty transmission control module. The transmission control module has various sensors such as vehicle speed sensors, wheel speed sensors, throttle position sensors, turbine speed sensor (https://www.yourmechanic.com/services/transmission-speed-sensor-replacement), and transmission fluid temperature sensors that all...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com