Hyundai Azera Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(127)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(127)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Hyundai Azera Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Hyundai AzeraV6-3.8LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Hyundai AzeraV6-3.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2009 Hyundai AzeraV6-3.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Hyundai AzeraV6-3.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2011 Hyundai AzeraV6-3.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2007 Hyundai AzeraV6-3.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Hyundai AzeraV6-3.3LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2017 Hyundai AzeraV6-3.3LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Hyundai Azera Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(127)

Rating Summary
121
6
0
0
0
121
6
0
0
0

Patrick

33 years of experience
1412 reviews
Patrick
33 years of experience
Hyundai Azera V6-3.8L - Brake Rotor/Disc Replacement (Front) - Austin, Texas
Always on time, always quick and always professional. Win, win, win.

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Hyundai Azera V6-3.8L - Brake Pads Replacement (Front) - Mission Viejo, California
Very timely and completed the job in quick time, was very courteous. the issue has been fixed

Charles

11 years of experience
69 reviews
Charles
11 years of experience
Hyundai Azera V6-3.8L - Oil Change - Miami, Florida
Charles is amazing. He showed up earlier than expected called when he was picking up the parts to double-check the order. Did a great job

John

36 years of experience
438 reviews
John
36 years of experience
Hyundai Azera V6-3.8L - Car is overheating - Sacramento, California
True professional who resolved issue without further parts replacement. Extremely satisfied with his expertise. Thanks

Excellent Rating

(127)

Rating Summary
121
6
0
0
0
121
6
0
0
0
Number of Hyundai Azera services completed
1397+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Rear Window Defogger Switch
If the rear window won't clear, the rear window defogger button won't light up, or the defogger isn't working consistently, have the switch replaced.
The Guide to Right-of-Way Laws in Montana
Right-of-way Right-of-way laws exist for the protection of motorists and pedestrians. There are no winners in collisions between vehicles, or between vehicles and pedestrians. So, to reduce the likelihood of property damage, injuries and even death, Montana has common sense...
P2015 OBD-II Trouble Code: Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1
P2015 trouble code definition P2015 is a generic OBD2 diagnostic trouble code point at a malfunction with the intake manifold runner position...

Erratic engine idle - 2005 Dodge Dakota

As you have said, this may be related to a dirty or failing idle air control valve. The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the engine at...

I have a leak in the coolant system that I have narrowed to I believe is the water inlet tube off of the lower radiator hose.

First off, I would say it would be best to pressure test the cooling system to verify where the coolant is coming from. With the complexity of repairs to the cooling system on this vehicle, it may be worth the...

It is overheating 2012 Dodge Journey

Hi there - the first task is to be sure you have bled all the air out of the system (https://www.yourmechanic.com/article/how-to-flush-your-cooling-system-by-rocco-lovetere) after changing the thermostat and refilling the reservoir. This includes running the engine at a fast idle for 10-15...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com